Why is my volume button not working on my AT Remote?

Posted on by Muna Meyer

Why is my volume button not working on my AT Remote?

Sound or volume issues Check the volume level and mute settings on your TV and any audio-visual (A/V) receivers you may have. Check audio settings on your device using your remote: Press the Home button, then Settings > System > Remote & Devices > Program Your Remote > Advanced Remote Program > Switch Volume Control.

How do I reset the volume on my uverse remote?

How to reset U-verse TV remote controls

  1. Press and hold the AT and the OK key simultaneously.
  2. Release both keys and all four mode keys will flash twice to indicate you are in programming mode.
  3. Enter programming code 900 by pressing the number keys on the remote control.

How do I connect my AT Remote to my TV volume?

Here’s how:

  1. Open DIRECTV STREAM on your TV device.
  2. Choose Settings and then System.
  3. Select Remote & Devices, then Program Your Remote.
  4. Choose the TV manufacturer or sound bar you want to add.
  5. Follow the prompts to finish up.

How do I reset my AT remote control?

Step 4: How to Reset Your AT TV Remote

  1. Hold down the “Dash (-),” “Apps,” or “Diamond” buttons.
  2. Wait until you see the LED lights on your remote blink blue twice.
  3. Press and release the red button on the side of your AT TV device to restart it, or.
  4. Unplug your AT TV device then plug it back in.

What is wrong with my AT Remote?

Check the batteries – When you press the AT button located at the top of the remote control, the button should shine brightly. If the button does not shine, change the batteries. Restart your receiver – Hold down the POWER button for 10 seconds then press it again to restart.

How do I turn up the volume on my cable box?

so that How do I turn up the volume on my cable box? You can do this on a tabletop. On the remote control for the cable box, press the Mode button for the device you want to control the volume (AUX, DVD, TV or CABLE) … Press the Volume + button.

How do I change input with uverse remote s30?

  1. To change the video input selection manually, press the TV/Video or Source button on your TV manufacturer’s remote control to locate the video input menu for your specific TV.
  2. The Video Input menu screen below shows checkboxes next to the devices that the TV is detecting.

How do I adjust the volume on my uverse box?

Adjust if necessary.

  1. To adjust the volume on the U-verse receiver press the AT button on the top end of the U-verse remote control.
  2. Pressing the +/ – VOL key on the U-verse remote control, adjust volume to 25.
  3. A volume indicator appears on the screen. The volume indicator disappears after a few seconds.

How do I program my uverse remote s30 s1b?

Here’s all you need to do:

  1. With your TV on, use your U-verse TV remote and press Menu.
  2. Select Help > Information > Remote Control Setup.
  3. Next, select your remote control from the TV onscreen list. Refer to your specific remote for TV/device setup options.
  4. Select Top Ten Brand Setup, Automatic Code, or Manual Setup.

Why won’t my cable remote change the volume?

Common Audio Issues Check the volume level on your TV and Spectrum Receiver. Unplug and re-plug your HDMI or component cables. Change your stereo audio and audio output settings in Audio & Video settings. Change channels to confirm if audio issue is channel-specific.