Who makes the best cutting torch?

Posted on by Muna Meyer

Who makes the best cutting torch?

Best Oxy-Acetylene Cutting Torch Kit

  1. Victor Performer EDGE 2.0 Oxy Acetylene Torch Kit.
  2. Hobart Oxy/Acetylene Tag-A-Long Portable Cutting Torch Kit.
  3. Lincoln Electric Port-A-Torch Mini Cutting Kit.
  4. Firepower 250 Series OxyFuel Acetylene Outfit.
  5. Harris Ironworker 510 DLX Cutting Torch Kit.

What is the best flame to use for oxy acetylene welding?

Neutral Oxy Acetylene Flame
A Neutral Oxy Acetylene Flame is used for Welding, Brazing and Silver Soldering most metals and is therefore the most common type of flame to use. A Neutral Flame is also used for Oxy Acetylene Cutting.

Is Victor torch better than Harris?

Victor’s torches are pretty good with the exception of the cut blow lever valve which, like the Smith, doesn’t allow feathering. This is another thing that makes Harris type F cutting torches superior to all others.

How can I get better at oxy-acetylene welding?

  1. Separately purge both oxygen and fuel gas lines.
  2. Open fuel gas valve 1/2 turn.
  3. Ignite flame with striker.
  4. Increase fuel gas flow until flame leaves end of tip and no smoke is present.
  5. Decrease until flame goes back to tip.
  6. Open oxygen valve and adjust to neutral flame.
  7. Depress oxygen lever and make necessary adjustments.

Which oxygen acetylene tanks is best for You?

1) 20 cubic feet of gas per tank 2) 40 cubic feet of gas per tank 3) 75 cubic feet of gas per tank 4) 145 cubic feet of gas per tank

How to make your own compressed oxygen for oxy torch?

First of all,keep the cylinder or tank in an upright position.

  • Remove everything like debris or dust that is covering the valve.
  • After matching the thread,connect the valve to the regulator.
  • It’s time to attach a hose.
  • Take the torch and connect the handle with hoses.
  • Keep your eyes on the pressure gauge and turn on the valve of the oxygen tank fully.

    • How to properly use an oxygen acetylene torch for cutting?

    Secure the tanks to a sturdy post,wall,or the like in an upright position.

  • Check and remove any protective coverings placed on the tanks.
  • Ensure that the regulators to be connected to the valves of the tanks have matching threads.

    • Which is better to torch with acetylene or propane?

    Carole Dunn. Big dilemma!

  • Ian Johnson
  • Mickdc. > Big dilemma! Hotter is not always better !
  • MBOSCHERT. I use acetylene/oxygen at home and propane at the shop. >the Little Torch does not do well with acetylene and oxygen.
  • David L. Feldman.
  • MS. >Big dilemma!
  • David D. Arens.
  • Alberic. > Big dilemma!
  • RAYMOND PAGE
  • BBrown1382. I find the set-up perfectly safe.