What size turbo is on a stock SRT-4?
A turbocharged 2.4 liter inline-4 gasoline engine (A853 engine) was used. This engine was nearly identical to the 2003 Chrysler PT Cruiser (A855 engine), except the SRT-4 did not have the unique intake manifold required to fit the engine into the PT Cruiser engine bay.
How much boost does a SRT-4 have?
Premium Member (Lifetime), SRT of the Month Stocker stops making power, with a good Front mount @ around 22psi. You can push it for nice Torque spikes and minimal HP gains to 30ish psi.
Is a SRT-4 fast?
The 153-mph Dodge Neon SRT-4 sedan is the fastest performance car you can buy for under $21,000. In fact, it’s one of the fastest cars sold for any amount, and is the quickest Dodge next to that automaker’s awesome 500-horsepower Viper sports car.
What does BWS Turbo mean?
This replaces the turbo cartridge unit completely. It looks like the factory turbo, except it has larger intake and exhaust side wheels. This allows it to move larger volumes of air compared to the factory turbo.
What is SRT-4 stage2?
The Stage 2 Turbo Upgrade Kit from Mopar Performance maximizes the stock turbo unit (Mitsubishi TD04LR-16GK-6cm2) of the Dodge SRT4. Stage 2 with Turbo Toys results in 265 horsepower†at 5200 rpm, and 280 ft. -lbs. of torque from 3600-4800 rpm.
How much power does a gt30 Turbo put out?
The turbine wheel is the standard 84 trim GT30. Full boost should be right around 3400rpms with a .63 A/R turbine housing. The maximum boost is around 33psi where we have seen 520whp. This turbo comes with a 4″ ported shroud inlet and 2″ outlet compressor housing.
What is the best turbo for a stock motor?
AGP 50 trim: This has been the standard that all street/pump gas turbos have been measured against for years. This is a great match for the 2.4L motor for maximum power with the stock rev limiter and the only “old technology” turbo worthy of being installed.
What size Turbo does a gtx3076r have?
This turbo comes with a 4″ inlet 2″ outlet compressor housing, and is in a .63 A/R turbine housing. GTX3076R: Using Garrett’s billet compressor wheel, the GTX3076R is capable of supporting just about 600hp.
What size fuel reducer do I need for a turbo?
*Note that you will also need a 3″ or 4″ intake and an external blow off valve to install the turbo kit. 4-3″ reducers are available for those who would like to use a turbo with a 4″ inlet with their 3″ intake piping. Also available with the turbo kit is our AGP Fuel Kit.