What size are SRT-4 wheels?
The standard SRT-4 used wheels that measured 16-by-7 inches at all four corners made of cast alloy. The ACR used a slightly smaller diameter alloy wheel with the same width that measured 16-by-7 inches at all four corners.
What cars have a 4.25 bolt pattern?
| Make | Model | Bolt Pattern |
|---|---|---|
| FORD | TAURUS SHO | 5 X 108 5 X 4.25 |
| FORD | THUNDERBIRD | 5 X 108 5 X 4.25 |
| JAGUAR | S-TYPE | 5 X 108 5 X 4.25 |
| LINCOLN | LS | 5 X 108 5 X 4.25 |
What is Mopar bolt pattern?
Finally, we end this bolt pattern lesson with Mopar, which used 5×4-1/2-inch bolt patterns for many of its vehicles for quite some time. The only exception is the smaller 5×4-inch bolt pattern, which was used on smaller vehicles such as the Plymouth Valiant and Dodge Dart.
How much HP can a stock SRT 4 handle?
How Much Power Can A Neon Srt-4 Handle? You can ride it for a quarter mile and it is a very streetable horse. The car can handle 500 horsepower, but it won’t last long under hard driving every day.
Are srt4 reliable?
They are reliable just as long as there takin car of like a turbo car needs to be… The more power the car puts out the more preventive maintenance it will need, same goes for all cars.
What car uses 5 on 4.5 bolt pattern?
Small Ford Pattern | 5 on 4.5 inches It was used on the Ford Fairlane, Ford Mustang and many other cars through the years. The 5×4. 5-inch bolt pattern is typically known as a “small Ford” pattern and can also be listed as 5×4-1/2 inches.
How do you measure the bolt pattern on a Mopar?
The easiest way to estimate the 5 lug bolt pattern, is to measure from the back of a hole to the center of the second hole. For a 4 lug wheel, measure center to center of two holes directly across from each other.