What radios are compatible with HRI 200?
The HRI-200 will work with the ftm. 100, ftm-300. and the ftm-400.it will not work with a 991 radio.
How do I connect my HRI 200?
If connecting an HRI-200 control mode repeater, switch on the DR-2X/XE unit while simultaneously pressing the mechanical [SETUP] button on the front panel. When the “YAESU” logo is displayed on the LCD touch screen, release the [SETUP] button, the LCD will change to “HRI-REPEATER MODE”. Then press the [OK] button.
What does the HRI 200 do?
The Yaesu WIRES-X HRI-200 (Wide-coverage Internet Repeater Enhancement System) enables Internet to RF communications that expands the range of amateur radio using internet enabled Voice-over-IP technology.
Do I need an HRI 200?
The HRI-200 Internet interface kit is not needed, and no fixed or dynamic global IP address is required.) With the router setting function such as “NAT”, “port mapping” or “address conversion function”, open the following 6 UDP ports from the PC IP address used for WIRES-X.
Does Yaesu wires still work?
WIRES II – Yaesu did terminate WIRES-II service on Saturday, September 30, 2017 at 06:00 UTC. They suggested in the future, to use the WIRES-X Internet linking system. WIRES-X – Supports the C4FM digital and the voice technology enables high sound quality.
What is the difference between WIRES-X and Ysf?
A YSF server is basically the same thing as a room except it is not connected to Wires-X. You will also notice a bridge connecting YSF to Wires-X. I do not know how America Link is linking everything together. The bridge represents that there needs to be something in between to connect them together.
What do I need for WIRES-X?
Requires a Yaesu C4FM Portable Digital Node capable transceiver (FT2D as of 12/2018 or firmware updated) an SCU- 19 USB Connection Cable (FT2D) and a PC with WIRES-X Software and Internet connection. Two forms of WIRES-X Access are supported, “Access Point” and “Direct Operation”.
Do I need an HRI-200?
What is Yaesu system Fusion?
System Fusion is Yaesu’s implementation of Digital Amateur Radio, utilizing C4FM 4-level FSK Technology to transmit digital voice and data over the Amateur radio bands.
What is Wires Xmode?
WIRES-X. WIRES (Wide-coverage Internet Repeater Enhancement System) is an Internet communication system which expands the range of amateur radio communication. WIRES-X automatically connects to nodes and rooms via the Internet. No more need to verify connection IDs or transmit cumbersome DTMF connection codes.