What is xDrive50i?

Posted on by Muna Meyer

What is xDrive50i?

An all-too-familiar luxury SUV formula In the case of the 2019 BMW X5 xDrive50i, the luxury SUV’s extra grunt comes in the form of an intoxicating 4.4-liter twin-turbo V-8 with 456 hp and 479 lb-ft of torque, and it’ll tempt you every time you’re behind the wheel.

How much horsepower does a 2020 BMW X5 have?

335 to 523 hp2020 BMW X5 / Horsepower

What is the difference between xDrive40i and xDrive50i?

The xDrive40i features a 335-horsepower, turbocharged 3.0-liter inline-six-cylinder engine that makes 330 pounds-feet of torque. The xDrive50i boosts those figures with its 456-hp, twin-turbocharged 4.4-liter V-8 that makes 479 pounds-feet of torque.

What are the problems with BMW X5?

Cooling System.

  • E53 X5 (1999-2006) The M62 engines on the first generation X5s had plastic impellers on the water pumps which would break apart prematurely.
  • E70 X5 (2006-2013) The second-generation X5s had plastic timing chain guides on the V8 engines that would go out prematurely (happened to me).

    • What are the most common BMW X5 problems?

    Oil Leaks From Engine Area.

  • Water Pump May Develop Coolant Leak.
  • Coolant Loss Due to Leak from Expansion Tank.
  • Blower Final Stage Fan Resistor May Fail.
  • Check Engine Light and/or Engine Overheating.
  • Window Fails to Open or Close.
  • Front Thrust Rod Bushings May Fail.
  • Coolant Leak From Radiator.

    • What are some features of the BMW X5?

    Adaptive cruise control (maintains a driver-set distance between the X5 and the car in front)

  • Lane keeping system (makes minor steering corrections to help keep the vehicle centered in its lane)
  • Evasive steering assist (enhances the forward collision mitigation system with steering-based collision avoidance)

    • How to replace BMW X5?

    Remove the front caliper. Jack up the front of the car and place it onto jack stands.

  • Replace the rotor. Use an E18 socket to remove the caliper bracket’s bolts.
  • Install the new pads and reinstall the caliper.
  • Remove the rear caliper.
  • Replace the rear rotor.
  • Install the new pads and refit the caliper.
  • Bleed the brakes.