What is the YPAO microphone?
The YPAO microphone is a device made by Yamaha which is used to calibrate the audio output of your Yamaha home theater AV receiver.
Can I connect a microphone to my receiver?
To plug a microphone into a home stereo receiver you need to connect the microphone to either a microphone preamplifier or a mixer. It can accept 2 microphones and has a stereo pair of RCA outputs to plug into your receiver or tape deck.
Can I use Audyssey mic with Rew?
Biggest problem with Audyssey mic for REW is the variability of your sound card. You will get consistent results for identifying room modes which you can then tune by ear (since most people like a slightly boosted bass), but you would not trust the Audyssey mic for a full 20Hz to 20kHz EQ.
Are calibration mics interchangeable?
Can I use any microphone to perform my Audyssey calibrations? Any other microphone will have different characteristics and thus will not produce accurate results. Microphones have different calibration curves and are not interchangeable.
How do I connect my microphone to my Yamaha Natural sound AV receiver?
Connecting your microphone is pretty simple, and all you need to do is follow these easy steps:
- Turn off your system before starting.
- Plug the microphone into the “mic in” input on your AV receiver.
- Providing everything is plugged in and looks correct, turn your system back on and try talking into the microphone.
What does ypao volume do?
YPAO Volume is an advanced sound technology that automatically applies loudness equalization (EQ) to the audio that comes through your AV receiver, applying just the right amount to compensate for the volume level. The lower the volume control setting, the more EQ it adds.
How do I connect a wireless microphone to my receiver?
Troubleshooting
- Make sure the microphone is on.
- Make sure the receiver is on.
- Unscrew the base of the microphone.
- Hold the base of the microphone up to the front of the receiver.
- Press the Sync button on the front of the receiver.
- The Ready light should now be green.
Can I connect microphone to amplifier?
Any microphone is cable of connecting with an amplifier. However, hooking up the microphone does require you to use an adapter as the signal coming from the microphone uses an XLR cable while the amp accepts 1/4-inch connections.
Does the Yamaha rx-v371 have HDMI output?
The Yamaha RX-V371 5.1-Channel Audio/Video Receiver offers many advanced home theater features including 4-in/1-out HDMI with 3D and Audio Return Channel compatibility, HD Audio with CINEMA DSP compatibility, and SCENE function. Improve your home theater with the latest HD Audio format decoding.
What makes the rx-v371 so special?
The RX-V371 excavates lots of sonic detail from the disc’s stunning DTS HD Master Audio mix, presenting subtle noises and background ambience in a clear, audible manner and not allowing the other sonic elements to interfere. That goes for the centre channel too, which lends voices surprising texture and clarity.
Is the Onkyo rx-v371 worth buying?
With its unspectacular spec sheet, the RX-V371 is a budget offering through and through, unlikely to attract the attention of home cinema enthusiasts. It lacks bells and whistles like USB ports, onscreen setup, networking and Dolby Pro Logic IIz – if that’s what you’re after, look higher up the range or check out Onkyo TX-NR609.