What is the difference between a spindle and a baluster?
A baluster and spindle is actually almost the same thing, but the word spindle is more commonly used because it is easier to remember and say. Balusters usually rest on a footing; this could be a step, floor or deck, whereas, spindles are supported by a horizontal rail at the bottom that is attached to the posts.
What is a stair Balister?
A baluster is a vertical moulded shaft, square, or lathe-turned form found in stairways, parapets, and other architectural features. A group of balusters supporting a handrail, coping, or ornamental detail are known as a balustrade.
How far apart should stair spindles be?
4 inches
Balusters are the vertical guards that support the handrail. They must be installed close enough that the space between them is less than 4 inches. Most city inspectors carry a 4-inch ball with them to test the spacing.
What are spindles in a house?
Balusters are the closely spaced supports used to hold up a waist-high handrail, safely containing people inside a staircase or patio deck. They are practical and decorative, providing style and support to the rail system. Balusters are attached to either the floor or secondary support called a base rail.
What are stair spindles?
Spindles (also known as balusters) are the vertical posts that connect the base rail and handrail on a staircase. They form part of the balustrade, the collective name for the base rail, handrail, newel posts and spindles.
How many spindles should a staircase have?
In order to comply with building regulations and codes, balusters must be spaced no more than 4 inches apart on center. The general rule is that your railing must have three balusters per foot (every 12 inches), although you can place them closer together if you’d like.
How many stair spindles do I need?
It is as simple as that. To calculate the number of stair spindles required, count the number of treads (steps) on the single flight, making sure not include the landing area, multiply by two, and then subtract two (as you will only require one spindle on the top and bottom steps to make room for the newel posts).