What is the density of INCONEL?
8.17 g cm‐3
The density of solid Inconel 718 alloy is 8.17 g cm‐3 at the room temperature of 300 K. The difference between the value of 7.46 at 100 K undercooling and 8.17 at T = 300 K is 0.71 g cm‐3.
What is the density of Inconel 625?
8.44 g/cc
Special Metals INCONEL Alloy 625
| Physical Properties | Metric | English |
|---|---|---|
| Density | 8.44 g/cc | 0.305 lb/in³ |
| Mechanical Properties | ||
| Tensile Strength, Ultimate | 880 MPa | 128000 psi |
| Tensile Strength, Ultimate at Elevated Temperature | 760 MPa | 110000 psi |
What is the composition of INCONEL?
Composition. Inconel alloys vary widely in their compositions, but all are predominantly nickel, with chromium as the second element.
What is inconel713c?
Inconel 713C is a nickel-chromium alloy that is ideally suited for jet engine gas turbine blades.
What is INCONEL 600 material?
INCONEL® (nickel-chromium-iron) alloy 600 (UNS N06600/W.Nr. 2.4816) is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.
What is the hardness of INCONEL?
32 – 40 HRC
Inconel 718 NACE calls out for a different annealing temperature and chemistry while maintaining a hardness range from 32 – 40 HRC. Each condition has specific uses depending on the application.
What is the hardness of INCONEL 600?
Typical Mechanical Properties
| Form and Condition | Tensile Strength | Rockwell Hardness |
|---|---|---|
| Rod and Bar Cold-drawn Annealed As-drawn Hot rolled Annealed As-rolled Hot-finished Strip Annealed | 80-100 105-150 80-100 85-120 80-120 80-100 | 65-85B 90B-30C 65-85B 75-95B 75-95B 84B max. |
What type of material is INCONEL 718?
nickel chromium
INCONEL® alloy 718 (UNS N07718/W.Nr. 2.4668) is a high-strength, corrosion-resistant nickel chromium material used at -423° to 1300°F. Typical composition limits are shown in Table 1. The age-hardenable alloy can be readily fabricated, even into complex parts.
Is INCONEL lighter than titanium?
Inconel is very heavy. Theoretically its additional strength means it can be made thinner, making it a lighter alternative to stainless steel, etc. but it is not lighter than Ti.
Is Inconel malleable?
Good malleability and machining quality Most Inconel alloys tend to experience strain hardening when machining or shaping is attempted.