What is SPHC material?
SPHC steel is a commercial quality hot rolled steel. SPHC is a material grade and designation defined in JIS G 3131 standard. The commercial quality hot rolled steel is a type of steel that can be used commercially for forming purposes that can also include sharing of a metallic sheet.
What is JIS standard in steel?
JIS G3131 is a Japanese standard for hot roll steel. This Standard specifies the technical requirements of the hot-rolled mild steel plates, sheets, and strips. JIS G3113 is a Japanese material standard for Hot Rolled steel plates, sheets, strips for automobile structural usage.
What is the composition of hot rolled steel?
Product Specification
Designation | Thickness (mm) | Chemical Composition(wt.%) |
---|---|---|
Others | ||
ANCOR-H | 1.8~7.0 | Cu ~0.50 Cr ~0.50 |
HICON700W | 2.3~6.5 | Cu ~0.55 Cr ~1.20 |
What is JIS material?
Japanese Industrial Standard (JIS) (1) General Mechanical structure carbon steel. The material number is the same as with CNS. Example: S30C means carbon content 0.30% of mechanical structure carbon steel. (2) Other use of carbon steel and alloy steel.
What does SPHC steel stand for?
HOT rolled steel
SPCC and SPHC are symbols used in the Japanese Industrial Standards for steel sheets. SPCC refers to COLD rolled steel whereas SPHC refers to HOT rolled steel.
What is the difference between CRCA sheet and MS sheet?
Unfortunately the term “mild steel” doesn’t mean much except “low carbon”; it could be hot rolled or cold rolled. CRCA is steel and therefore highly prone to rusting. Often the rolling mill will apply oil after the annealing, and this will add at least a little short term rust resistance.
What is DIN steel?
DIN steel specifications are German standards developed by the “Deutsches Institut für Normung”, meaning “German Institute for Standardisation”. The institute is a member of the European Committee for Standardization (CEN) and the International Standards Organization (ISO).
Is code for structural steel material?
IS: 2062 – specifications for steel for general purposes. IS: 226 – specifications for rolled steel made from structural steel.
What is ASTM A569?
ASTM A569 designates hot rolled carbon steel sheet and strip of commercial quality, in coils and cut lengths, with a maximum carbon content of 0.15%. These steels are used for products produced by bending, moderate forming, and welding.
What is the thickness of the hot rolled raw material sheet steel?
1.2mm to 25.4mm
With a 5-mill production system, JFE produces a wide range of hot strip siz- es, including thickness from 1.2mm to 25.4mm and widths from 600mm to 2,300mm, which is the world’s widest hot rolled strip.
How do you read JIS steel standard?
Standards are named in the format “JIS X 0208:1997”, where X denotes area division, followed by four digits designating the area (five digits for ISO-corresponding standards), and four final digits designating the revision year.
Is SAE and AISI the same?
The Society of Automotive Engineers (SAE) designates SAE steel grades. The American Iron and Steel Institute (AISI) originally started a very similar system. Over time they used the same numbers to refer to the same alloy, but the AISI system used a letter prefix to denote the steelmaking process.