What is EN9 steel?
EN9 is a medium carbon steel grade commonly supplied in the as rolled condition. It can be flame or induction hardened to produce a high surface hardness with excellent wear resistance for a carbon steel grade. EN9 bar is available in full lengths or can be cut to your requirements.
Is standard for EN9 material?
EN9 Carbon steel is a medium carbon steel with 0.5-0.6% C as per BS 970 standard.It is also known as 070M55 with tensile strength between 500-800Mpa. When hardened and tempered, it develops a tensile strength in the range 700-1000 N/mm depending on ruling section. …
What is steel grade A36?
ASTM A36 Steel Plate is one of the most common grades of steel used in structural applications. This mild carbon steel grade contains chemical alloys that give it properties such as machinability, ductility, and strength that are ideal for use in constructing a variety of structures.
What is the difference between EN9 and En19?
En9 is a steel grade for mechanical and allied engineering purposes specifications for wrought steel. En19 is a high quality alloy steel with tensile strength combining good ductility and shock resistance. It is the material that lends itself well to any application where strength is the primary consideration.
Is A36 steel any good?
A36 steel can have ultimate tensile strengths from 58,000 to 79,800 psi. The exact ultimate tensile strength is determined by a variety of factors such as chemical composition and forming method.
What is the HRC for EN9?
EN9 Carbon Steel Strip, Thickness: 1-10 Mm
| Thickness | 1-10 mm |
|---|---|
| Technique | Hot Rolled |
| Edge | Mill Edge |
| Hardness | 60-80 HRC |
| Material Grade | EN8 |
What is EN3 steel?
EN3 (070M20) Engineering steel EN3A and EN3B are general engineering steels, suitable in applications where heavy stresses and heat treatment are not involved, such as welded and riveted structures, forgings, machined parts and hot pressing. It is a bright drawn, or turned, mild steel with good machinability.
How strong is A36 steel?
A36 steel can have ultimate tensile strengths from 58,000 to 79,800 psi. The exact ultimate tensile strength is determined by a variety of factors such as chemical composition and forming method. A36 is relatively ductile and can elongate to around 20% of its original length when tensile testing.