What is a swivel plate?
The swivel plate is a rotatable adapter plate. This allows additional freedom of movement for the cable management system, e.g. at the clamp on axis 6 of the robot.
How do you tighten a bar stool swivel?
Solution: Check over the entire frame to ensure each bolt is tight, and use an Allen key to tighten any that may have come loose. If all the bolts are tight but the frame still wobbles, you will need to loosen each one, realign the frame and the seat and then tighten them again evenly.
What are the parts of a bar stool?
Bar Stool Parts and Components
- Base & Incorporated Floor Protectors. The first part is the base, which is designed to keep the whole stool stable and varies in size with design.
- Collar & Gas Lift Column.
- Footrest & Seat.
What is swivel bearing?
The swivel bearing is intended to permit free rotation of the tool string and minimize line force throughout slackline or cable preparation. The bearing style ensures that the swivel continues to rotate swimmingly once subjected to high masses.
How do you stop swivel stool from swiveling?
Fit a small rubber wedge under the chair, between the base and the swiveling pole. Hammer the wedge gently into the base so it creates a seal between the chair’s base and the pole it sits upon. Don’t hammer too hard or you could damage the chair. The wedge will cause friction and will limit the chair’s range of motion.
How do you lubricate a swivel stool?
Bearings of swivels should be greased regularly (minimum of once every six months) to prolong the service life of the swivel unit. Use a Moly EP type Wheel Bearing Grease. Use of oil, silicon lubricants, or spray lubricants such as WD- 40 is not recommended.
How do you fix a gas bar stool?
To do this, you can place one foot on either side of the base of the stool. Pull the seat part of the stool upwards so that it reaches the top. Hold the gas lever, then hold both sides of the seat top and pull. It should then pop off.
What is the difference between free swivel and memory swivel?
“Free swivel” means the seat moves freely from side to side without pausing into any position. “Memory swivel” means that it will lock into a few different positions from side to side while in the seat and stay in place (memorize it) when you leave the seat.