What does a viper recloser do?
This recloser controller delivers comprehensive performance in protection, monitoring, control, automatic network configuration and communications.
What does a viper switch do?
The Viper -ST provides overcurrent protection for systems through 38kV maximum, up to 1000A continuous current, with 12.5kA symmetrical interrupting and 16kA symmetrical interrupting up to 27kV.
How does a recloser work?
A recloser is an automatic, high-voltage electric switch. Like a circuit breaker on household electric lines, it shuts off electric power when trouble occurs, such as a short circuit. If the problem was only temporary, then the recloser automatically resets itself and restores the electric power.
What is a pad mounted recloser?
Eaton’s Pad-Mounted NOVA recloser The electronically controlled, enclosed recloser features solid di electric vacuum interruption in a mild steel enclosure design, safeguarding against weather, tampering and rodents.
What is a nova recloser?
Eaton’s Cooper Power series NOVA recloser is a three-phase, vacuum-interrupting recloser that successfully combines four patented technologies: cycloaliphatic-epoxy encapsulation, high-performance vacuum interrupter, dependable lower power mechanism and an automated microprocessor recloser control.
How long does car run with Viper remote start?
Any vehicle started with the remote engine starter can idle for a total of 20 minutes. Automatic engine shutdown occurs after 10 minutes, but the vehicle may be remotely started as many times as you wish for an additional 10 minutes.
What are the differences between a recloser and a CB?
Different control methods: the recloser has its own control equipment, and the detection, control, and operation are self-contained systems, while the circuit breaker and its control system are designed separately.
How do I increase the run time on my Viper remote start?
Use the remote start timer button and aux buttons to scroll through the menus. Once you have scrolled through you will find time setting. Press F button and adjust the hours by using the Aux and timer buttons. Press F button once again to adjust the mins and press F to finish time adjustment.