What are the specification of toolmakers microscope?
Product Specification
Model | RTM-900MT |
---|---|
Objective | 2x Achromatic |
Voltage | 380V |
Least Count | 0.01mm |
Frequency | 50/60 Hz |
Which components are inspected by a tool makers microscope?
Inspection of components by tool makers microscope – Metrology & Quality Control
- a. gauges.
- b. screw threads.
- c. dies and fixtures.
- d. all of the above.
What is the shape of the tool makers?
What is the shape of the tool maker’s flats? Explanation: Tool maker’s flats are small circular surface plates which are used for the high precision measurement work.
What is the use of autocollimator?
An autocollimator is an optical instrument for non-contact measurement of angles. They are typically used to align components and measure deflections in optical or mechanical systems.
What is the shape of the tool maker’s Flats Mcq?
What is the shape of the tool maker’s flats? Explanation: Tool maker’s flats are small circular surface plates which are used for the high precision measurement work. 2.
What precise movement does CMM have?
What precise movement does CMM have? Explanation: Co-ordinate measuring machines are useful for three dimensional measurements. These machines have precise movements in x,y and z coordinates which can be easily measured and controlled. 2.
What is the purpose of calibrating a microscope?
Microscope Calibration can help ensure that the same sample, when assessed with different microscopes, will yield the same results. Even two identical microscopes can have slightly different magnification factors when not calibrated.
What is the shape of the tool maker flat?
circular
What is the shape of the tool maker’s flats? Explanation: Tool maker’s flats are small circular surface plates which are used for the high precision measurement work.
What is autocollimator principle?
The basic principle of an autocollimator is quite simple: one directs a collimated beam, which by definition has a small beam divergence, to a flat reflecting object (a mirror) and detects the angular position of the reflected light, which typically needs to be close to direct back-reflection.
What is the principle involved in autocollimator?
The two main principles used in autocollimators are (a) projection and refraction of a beam parallel to light by a lens (b) the change in the direction of the reflected angle on the plane is accompanied by a change in the angle of reflection of the surface.