Is it legal to drill your own well in Georgia?
(a) Nothing in this part shall prohibit a person from drilling a well on his or her own property if such property is his or her primary residence. A person is prohibited from drilling a well or wells on property he or she owns and is developing for resale unless such person has a license as a water well contractor.
How deep is a deep well in Georgia?
There are two main types of household wells in Georgia. “Bored” wells are dug with an auger and are typically 24 to 30 inches in diameter and 10 to 30 feet deep. “Drilled” wells are much smaller in diameter and considerably deeper – usually 100 to 400 feet deep.
How far apart should wells be?
As a general guidance, personal drinking water wells should have a minimum horizontal distance of at least 10 feet and preferably 25 feet from such boundaries. State or local standards may be less or more stringent in your area.
Can I drill a well anywhere?
The simple answer to Connie’s question is yes. You probably can drill your own well on your property. You, of course, would have to contact your local building department to see if there are any regulations that must be followed.
How much does it cost to install water well?
Residential Water Wells – $15 – $25 per square foot. Residential projects tend to be less expensive. Drilling costs between $15 and $25 per square foot, before considering additional installation needs.
How much does geothermal well drilling cost?
Geothermal wells provide heating and cooling energy for your home. Any landowner may drill a well on their property. Well drilling costs $15 to $25 per foot for the drilling process only. Installing a complete well water system costs $25 to $65 per foot, irrigation wells run $50 to $100 per foot, and geothermal wells are $5 to $40 per foot.
How much does it cost to dig a shallow well?
Digging a shallow well costs $1,800 and $3,000. Costs depend on the depth drilled, soil conditions, and the well’s diameter. *Prices are for a complete water well system. Residential water wells are typically 100′ to 300′ deep and 4″ to 6″ in diameter. Local well drillers or neighbors can give you an idea of how deep to drill.
How much does it cost to drill a well in Texas?
Well Drilling Cost. Drilling a well costs $5,325 to $9,180 for an average depth of 150 feet. Most homeowners spend $3,750 to $15,300, or $25 to $65 per foot for well installation. Digging a shallow well costs $1,800 and $3,000. Costs depend on the depth drilled, soil conditions, and the well’s diameter.