How often should I oil my rower?
every 50 hours
Concept2 recommends you apply the oil every 50 hours of use. And it’s easy to do. Put a table spoon of oil on a paper towel/rag, and then wipe it on the length of the chain.
How often should you oil the chain on a Concept2 rower?
Every 50 Hours
Every 50 Hours of Use, Weekly for Institutional Users Lubricate the chain with a teaspoon of purified mineral oil, 3-IN-ONE® oil, or 20W motor oil. Apply oil to a paper towel, and rub the paper towel along entire length of chain. Wipe off the excess. Repeat if needed.
What maintenance does a rowing machine need?
Monthly Maintenance:- Check and tighten all screws. Wipe down the frame and slide with a household cleaner – dust can impair the smooth function of a rower. Check for wear and tear on all moveable parts – replace any that look worn or damaged.
How do I clean my Concept 2 monorail?
Wipe the monorail with a cloth or non-abrasive scouring pad after use. You can use soap and water or any glass cleaner. Do not use mineral acids, bleach or coarse abrasives.
What oil should I use on my Concept 2 rower?
Lubricate the chain with a teaspoon of purified mineral oil, 3-IN-ONE® oil, or 20W motor oil. Apply oil to a paper towel, and rub the paper towel along entire length of chain. Wipe off the excess.
Can I keep my Concept 2 rower in garage?
As long as it’s dry there should be no problems. Cold air is more dense than warm air so you may get a slight change in drag. Once you warm up (you may need to wear a sweatshirt for your warm up/cool down), then rowing in a cold outbuilding should be just fine.
How do you lubricate a rowing machine?
Lubricate the chain with a teaspoon of purified mineral oil, 3-IN-ONE® oil, or 20W motor oil. Apply oil to a paper towel, and rub the paper towel along entire length of chain. Wipe off the excess. Repeat if needed.
How do I clean my SkiErg?
As Needed
- Clean grips and straps after each workout. Use a mild soap or cleaning product.
- Clean surfaces of the SkiErg with any household cleaner. DO NOT spray any fluid onto the monitor.
- Dust and lint can collect inside of the flywheel enclosure. This can restrict airflow reducing the resistance of the fan.
When should I replace a part in my Concept2 machine?
When in doubt about the condition of any part, Concept2 strongly advises that you replace the part immediately. Use only genuine Concept2 parts. Use of other parts may result in injury or poor performance of the machine.
How long have Concept2 products been in business?
Since 1976. We’ve been making world class rowing products since 1976. When you choose Concept2, you invest in a legacy of excellence. Our products will help you get fit, stay fit, win your race, or train for your primary sport.
Why choose Concept2 rowing products?
We’ve been making world class rowing products since 1976. When you choose Concept2, you invest in a legacy of excellence. Our products will help you get fit, stay fit, win your race, or train for your primary sport.