How high can metal studs go?
Shall not be used in exterior walls. Utility-grade studs shall not be spaced more than 16 inches on center or support more than a roof and ceiling, or exceed 8 feet in height for exterior walls and load-bearing walls or 10 feet for interior nonload-bearing walls.
What gauge studs are considered structural framing?
Most contractors are familiar with the light-gauge steel studs and track you can buy at lumberyards and drywall supply houses. These studs are usually 25-gauge steel with 1 1/4-inch flanges and are intended for non- load-bearing applications such as partition walls.
Can metal studs be load bearing?
Heavier gauge metal studs are used in load bearing walls and structural applications such as exterior walls. Framing techniques for metal studs are similar to those of wood construction. Metal studs are available in many of the same basic dimensions as wood studs.
Can metal studs be used for ceiling?
Steel studs are beneficial for building ceilings because they are straight, light and can be purchased in longer lengths than wood studs. For low clearance areas, they also come in 1 5/8 inch widths. In many applications, installing a steel stud ceiling take less time and effort than it would with wood studs.
Should basements use metal or wood studs?
Lightweight: Steel studs are lighter to carry and store than wood because they are hollow. Studs can nest into each other to some degree. Good for problem areas: Steel studs work well in bathrooms, basements, and other water-prone areas since they are impervious to moisture.
What gauge steel is 33 mil?
20 gauge
These studs and track are manufactured from mill certified galvanized steel and are designed for use in curtain-wall and load bearing applications. Thicknesses range from 33 mils (20 gauge) to 97 mils (12 gauge). Flange or leg sizes for both studs and track range in a variety of sizes.
What is the width of a 3 5 8 metal stud?
Studs
| Size (Width) | Length (ft) | Stock |
|---|---|---|
| 3 5/8″ | 12 | ✔ |
| 3 5/8″ | 13 | ✔ |
| 3 5/8″ | 14 | ✔ |
| 3 5/8″ | 16 | ✔ |
How wide is a 3 5 8 metal stud?
Exterior Structural Track and Metal Stud Sizes
| Member Depth | Flange Width | Material Thickness (GA) |
|---|---|---|
| 3-5/8″ – 12″ | 1-3/8, 1-5/8″, 2″ & 2-1/2″ Leg | 12 ga 97 Mil |
| 2-1/2″ – 12″ | 1-1/4″ – 1-1/2″, 2″ & 2-1/2″ Leg | 20 ga 33 Mil |
| 2-1/2″ – 12″ | 1-1/4″ – 1-1/2″, 2″ & 2-1/2″ Leg | 18 ga 43 Mil |
| 2-1/2″ – 12″ | 1-1/4″ – 1-1/2″, 2″ & 2-1/2″ Leg | 16 ga 54 Mil |
What is the maximum height of a stud in a wall?
Studs more than 10 feet in height and up to 12 feet in height shall have lateral blocking/bracing, 4 feet on-center maximum. 2 x 4 studs more than 10 feet in height and up to 12 feet in height shall be doubled.
What is the standard size of studs in R602?
R602.3.1 Stud Size, Height and Spacing. Utility grade studs shall not be spaced more than 16 inches (406 mm) on center, shall not support more than a roof and ceiling, and shall not exceed 8 feet (2438 mm) in height for exterior walls and load-bearing walls or 10 feet (3048 mm) for interior nonload-bearing walls.
What is the standard size of a gable wall stud?
The size and thickness of gable endwall studs with heights less than or equal to 10 feet (3048 mm) shall be permitted in accordance with the limits The studs used in foundation walls shall be 2-inch by 6-inch (51 mm by 152 mm) members.
How far apart should studs be on exterior walls?
Shall not be used in exterior walls. Utility- grade studs shall not be spaced more than 16 inches on center or support more than a roof and ceiling, or exceed 8 feet in height for exterior walls and load-bearing walls or 10 feet for interior nonload-bearing walls.