How far apart do electric fence post need to be?
How to fix it: In an electric-fencing system, Derynck reccomends fence post spacing 80-100 feet apart, or about 50 posts per mile. He suggests using a “stay” – a shorter post that sits on top of the ground and holds wires up – if posts are spaced 100 ft. apart.
How do you connect an electric fence to a rabbit?
To install an electric fence, string the bottom wire 2 inches above the ground on the outside and the top wire 4 inches above the ground on the inside. Keep the wires weed and grass free. Charge with a garden electric fence charger. To protect trees and shrubs, enclose them with 1/4″ wire hardware cloth.
What size t-post do I need for a 4 ft fence?
When figuring out what size T-post to use for a four-foot fence, remember that you will drive the posts about two feet into the ground. This means you need posts that are at least 24 inches longer than how tall you want your fence. For a four-foot fence, you should use T-posts that are at least six feet long.
Can you use barbed wire for electric fence?
When converting a barbed wire fence to an electric fence, you’ll want to remove the existing wire. Understand that electrifying barbed wire is very dangerous – people and animals could get trapped on the fence and subjected to repeated shocks as they struggle to get free.
How high should a rabbit fence be?
2 feet high
As shown in the illustration at the top of the page, fencing should be at least 2 feet high to prevent rabbits from jumping over. To keep them from burrowing under, bury at least 3 to 6 inches (the deeper the better) and bend the buried portion away from plantings.
How do I rabbit Proof my garden fence?
L-shaped wire on bottom of fence Source To build a rabbit proof fence, it is necessary to have steel fence posts every ten feet. Any further apart and the wire sags in the middle and the rabbits can get through it. You will need to dig a trench one foot deep and eight inches wide at the bottom of the whole fence.
What is the difference between T post and u post?
Steel T-posts and U-posts are used exclusively with wire fencing. T-posts are shaped like the letter T, and U-posts are shaped like the letter U. You can get away with a little more distance between posts if using barbed wire.
What kind of fence do you use to stop rabbits?
Intermediate posts may be tread-in (metal with Insulators or plastic) or wooden posts with Insulators. A fence using 4 lines of tensioned wire can be used to stop rabbits entering you garden etc. The wire is supported by special tread-in posts or Insulators mounted on wooden posts approximately 0.7m (2′ 3″) high.
Will an electric fence scare rabbits?
When a rabbit tries to get into your garden, they will be shocked with a small jolt of electricity. It will be enough to scare them, but it will not hurt them. Many people will use poisons or other methods that are not safe around your pets. An electric fence will shock your pets also, but there will be no lasting damage.
How far apart should fence wires be for rabbits?
When you’re setting up your fence to protect your garden from rabbits, it’s best to use 3 to 5 wires. Space these wires 4 inches apart and place the first wire at 4 inches. Because these wires are close to the ground, you should keep them free from vegetation.
How do I add a strainer post to an existing fence?
A more permanent option is to use 4 lines of tensioned stranded galvanised wire or add the wire to an existing fence supported by offset Insulators. This solution requires a strong strainer post to be located at every change of direction. Intermediate posts may be tread-in (metal with Insulators or plastic) or wooden posts with Insulators.