How do you use SoundStation 2?

Posted on by Muna Meyer

How do you use SoundStation 2?

When the SoundStation2 is in Ready state or on hook, press the Volume but- tons to adjust the ringer volume. When the SoundStation2 is off hook, press the Volume buttons to adjust the dial tone volume. During an active call, press the Volume buttons to adjust the speaker volume.

How do you do a 3 way call on Polycom SoundStation 2?

Placing a Three-Way Conference Call

  1. Start a call with Polycom SoundStation2.
  2. Press the Conference button . Places the first call on hold.
  3. Dial the number and connect with the second party.
  4. Press the Conference button. This will merge the three calls.

How do I connect my Polycom soundstation 2 to my laptop?

The RED connector on the Computer Calling cable plugs into the MIC IN jack on your desktop computer or laptop. If the sound card does not have a Mic input, use the LINE IN input instead. Once the SoundStation2W is connected to your desktop computer or laptop, press the soft key on the phone that reads “IP MODE”.

How do I reset my Polycom soundstation 2?

Go to the menu and navigate to ‘Admin Setup -> Diagnostics -> Restore Defaults’ and press the ‘OK’ soft button. It will work instantaneously, then navigate down to ‘Reboot Phone’ and press the ‘Reboot’ soft button. Your phone will reboot.

How do I set up my Polycom phone?

  1. Quick View. Turn your phone upside down and locate the connection ports.
  2. Connect the LAN Ethernet cable from the wall jack to the phone.
  3. Connect the. Ethernet cable. from the phone to the computer.
  4. Connect the handset cord to the phone jack port.

How do I set up video conferencing equipment on Polycom?

How to Use Polycom Video Conferencing

  1. Step 1: Turn on the Polycom System. To turn on the unit, hold down the green button on the remote for a few seconds or until you see a blue flashing light on the Polycom unit.
  2. Step 2: Turn on the TV Screen.
  3. Step 3: Start a Video Conference Call.
  4. Step 4: Turn off the Polycom Video Unit.

Does Polycom make analog phones?

The SoundStation2 Analog Conference Phone from Polycom features intelligent microphones, speakers, and audio technology to ensure that you can hear and be heard. It supports up to ten participants at once and full duplex technology for a natural and simultaneous two-way conversation without clipping or drops.

How do you do a 3 way call on Polycom?

While on an active call, press the More soft key on your Polycom VVX411, then press the Conference soft key. The first call is placed on hold. Dial the 2nd number. When the 2nd party answers, press the More soft key, then press the Conference soft key to connect the calls.

How do you do a three way Conference call on a Polycom phone?

How to make conference calls (3-way calling) with a Polycom Conference Phone?

  1. Call the first Party.
  2. Press FLASH, and wait for the dial tone.
  3. Call the second Party.
  4. Press FLASH, to conference the two lines together.