How do you use Blackburn Air Stik?
How to Use a Blackburn Bicycle Pump
- Kneel next to the tire that you wish to inflate. Note the recommended pressure level printed on the side of the tire.
- Flip open the cap attached to the end of the bicycle pump.
- Pull out the end of the pump, then push it back into place.
How do you fill a Presta valve?
To inflate a Presta valve, remove the dust cap, unscrew the brass cap, slide a pump onto the valve as far as it will go and flip up the lever on the pump to secure it in place. Pump away until your tire is inflated. Then, remove the pump, screw the brass cap back into place and replace the black dust cap.
Can you fill a Presta valve with a regular pump?
They use an internal spring to allow inflation while keeping the valve closed. You can inflate this style easily with any regular air pump. Presta valves are a lot narrower and are commonly found on higher end bikes with narrow rims. To inflate a Presta valve you’ll need a regular air pump and a special adapter.
How do you use a Blackburn bike pump?
Blackburn bicycle pumps feature a two-chamber design, which helps to maximize the device’s ability to move air; a switch attached to the rear of the pump determines which chamber is active. Depending on the type of valve installed, you may have to reconfigure your Blackburn pump prior to use. Kneel next to the tire that you wish to inflate.
How do you inflate a Blackburn tire pump?
Depending on the type of valve installed, you may have to reconfigure your Blackburn pump prior to use. Kneel next to the tire that you wish to inflate.
What kind of Education does Richard Blackburn have?
He has received a Bachelors of Arts in English from the University of California, Berkeley. Blackburn produces a variety of bicycle accessories, including a line of portable bicycle pumps. These cylindrical devices come with mounting brackets that bolt onto your bicycle’s frame, allowing you to carry the pump with you as you ride.