How do you reset the oil light on a Alfa Romeo 159?
Press as much as possible on the accelerator pedal. Then press 3 times on the brake. Remove the ignition. Turn on the ignition to turn your vehicle back on.
How do I reset my Giulietta?
To reset the Alfa Romeo Giulietta service warning light, you need to turn on the instrument panel and keep the accelerator pedal pressed. Keeping it pressed, the brake pedal must be pressed six times; turning the ignition off and on again, the Service warning light will be reset.
How do you reset the service light on a 2016 Alfa Romeo Giulietta?
If the drain indicator remains on, perform the following procedure:
- Switch on the contact your Alfa Romeo Giulietta and without starting the engine in the same way as before.
- Press the maximum the accelerator pedal.
- Thereafter press 3 times the brake.
- Remove the ignition.
- Turn on the ignition to restart your vehicle.
How do I reset my ECU Alfa 147?
Registered
- Disconnect battery for 45 mins.
- Reconnect battery, and turn ignition to MAR for 90 secs.
- Turn off and leave 90 secs.
- Start engine WITHOUT pressing throttle and let the car idle for 15 mins (I repeat, do not touch the throttle whilst the car is idling)
- Turn engine off and leave for 10 minutes.
How do you reset the ECU on a Alfa Mito?
How do I reset my Alfa Romeo?
Get in your car and turn on the instrument panel, but leave the engine off. Wait for the service light to appear and then press the brake pedal six times – the light should disappear. Turn off the ignition and turn it on again to verify that it has disappeared.
How do you check the oil level on a Alfa Romeo Giulia?
Basic steps:
- Run vehicle for at least 5 minutes to get oil temps up. (> 176°F / 80°C)
- Turn off vehicle, wait a couple minutes.
- Turn on vehicle, but do not start. ( no brake)
- Should see oil level gauge flashes momentarily on the center I-panel.
- Check Infotainment / My Car / Oil level.