How do you program the key for a 2001 Ford Explorer?
INSERT key into Ignition and TURN from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm Programming Mode. Within 20 seconds press any button on first keyless remote fob. Door locks will cycle to confirm programming.
How do you program a Ford Explorer key?
Step-by-Step Programming Instructions
- Shut the car doors, then open the driver-side door. Press the UNLOCK button the driver-side door.
- Now, turn the ignition from OFF to RUN 8 times.
- Press any button on the Ford remote to program it.
- Have more than one key fob?
- Lastly, turn the ignition OFF.
Does a 2001 Ford Explorer have a chip in the key?
If your Ford Explorer was made in the years 1998, 1999, 2000, 2001, 2002 or 2003, then most likely your Ford Explorer will require a transponder chip key. The key fob is not a must, you can still have just a regular transponder chip key without a fob. The key fob is basically the same key as the transponder chip key.
How do I reset my Ford door code without factory code?
If You need to reset Your keyless entry code in Your Ford Edge but do not have the original code the only way to do it is to contact a Ford dealership. You will need to bring Your vehicle in to them and allow them to connect diagnostic software to it in order to read the code that is stored in the ECU.
What is the factory set code for Ford Explorer?
Look for the factory code. The 5 digit security code is usually in the glove department if you have not moved the owner’s wallet card. The 5 digit code can also be found on years 2011- 2018 on a white label inside passenger side fuse box, it will be the 5 numbers you need, followed by a letter.
How do you tell if a Ford key has a chip?
Key Identification Transponder keys also have a chip in the head of the key. Typically they have a plastic head and are larger than the mechanical key. For example, here is a picture of a Ford H75 mechanical key blank and the H74-PT transponder key blank.