How do I use IPv6 nslookup?

Posted on by Muna Meyer

How do I use IPv6 nslookup?

You can use the nslookup command to display IPv6 name service information. Under your user account, run the nslookup command. The default server name and address appear, followed by the nslookup command’s angle bracket prompt. Quit the nslookup command by typing exit .

How do I find my IPv6 domain?

8 steps to get your site ready for IPv6

  1. Add an IPv6 address to your web server.
  2. Add an AAAA record for your website.
  3. Add an AAAA record for your bare domain.
  4. Ensure your DNS servers have IPv6 addresses.
  5. Add IPv6 glue for your nameservers, if necessary.
  6. Add IPv6 addresses for your incoming mail servers.

How do I find MX records in cmd?

To use NSLOOKUP to view MX records:

  1. Open a command prompt.
  2. Type “nslookup” then press Enter. You will see the following: Default Server:
  3. Type “set type=mx” then press Enter.
  4. Type the domain name that you want to look up, then press Enter. The MX records of that domain will appear.

What is netstat command used for?

The network statistics ( netstat ) command is a networking tool used for troubleshooting and configuration, that can also serve as a monitoring tool for connections over the network. Both incoming and outgoing connections, routing tables, port listening, and usage statistics are common uses for this command.

How do I find my IPv6 routing table?

Displaying the IPv6 route table

  1. To display the IPv6 route table, use the show ipv6 route command.
  2. To display a summary of the IPv6 route table, enter the show ipv6 route summary command.
  3. The command-line interface (CLI) output of the show ipv6 route summary command displays the following information.

What is the IPv6 config command?

The list of CLI commands for the configuration of IPv6 is as follows: ipv6 enable. ipv6 unicast-routing. ipv6 address – prefix prefix-len….4.1. 1 ipv6 enable.

Mode Interface Configuration
Example SEFOS(config-if)# ipv6 enable
Notes IPv6 is enabled on the default VLAN interface.

What is a DNS lookup IPv6 test?

ABOUT DNS LOOKUP IPv6 This test will list AAAA DNS records for a domain. The DNS lookup is done directly against the domain’s authoritative name server, so changes to DNS Records should show up instantly.

How do I find the IPv4 and IPv6 addresses of a domain?

As shown above, the “nslookup” command followed by a domain name will show you the IPv4 and IPv6 addresses (A records and AAAA records) assigned to the specific domain. nslookup

What is an IPv6 address?

The IPv6 address contains eight groups of four hexadecimal digits. Each group is separated by a colon (:). The above one is an expanded IPv6 form of one of Google DNS servers. You can also compress the IPv6 and use that form. With time IPv6 increases its adoption.

What is IPv6 WHOIS lookup tool?

About IPv6 Whois Lookup Tool. IPv6 lookup tool gives you the complete information of an internet protocol version 6 address (IPv6). IPv6 is becoming a popularly used ip address type these days and majority of the users are starting to use ipv6 address on their home or office computers as well as web servers.