How do I reset my Dodge anti-theft system?
To deactivate the anti-theft system so that you can drive your vehicle normally once again, the steps are simple:
- Place your key in the ignition of the vehicle.
- Do not attempt to crank up your truck.
- Allow your key to sit in the ignition for 60 seconds.
- After 60 seconds have passed, start your vehicle as normal.
How do you reset the anti-theft system on a 1996 Pontiac Grand Am?
How do i reset security code?
- Perform a security system relearn.
- Let the vehicle sit for more than 10 minutes with the key off.
- Attempt to start the engine, leave the key in the run position monitoring the security system indicator.
- After 10 minutes, the security indicator will change state.
How do I reset my Dodge Magnum anti-theft system?
To reset the 2005 dodge magnum security system, you will insert the ignition key and turn it to the on spot, and then attempt to start the engine (crank over), the engine does not run. With the key still in the run spot, wait 10 minutes, and the safety light will flash and then go out.
How do you reset the security system on a 1998 Dodge Durango?
Press and hold the valet/override button below the steering column within five seconds of turning the ignition on. Release the valet/override button when the security light on the instrument panel stops blinking. The alarm is reset and disabled.
How do I deactivate my anti theft system?
To turn off the anti-theft system, use your remote to press the unlock button key. It is advised to use the key to unlock the door and turn on the ignition switch. If that does not work, try to lock the door on the driver’s side using the key while you are out of the car.
How do I bypass the security system on a 1998 Dodge Durango?
It worked just like you said “To reset the alarm on the Dodge Durango you need to lock all the doors, then unlock the driver side and put the key into the on position. Now turn it off and then back on twice and it will reset.