How do I reset my Dlink DIR-505?

Posted on by Muna Meyer

How do I reset my Dlink DIR-505?

Step 1: While the router is on, use the end of a paper clip to press the button inside the pinhole on the underside of the router, as highlighted by the red circle below. Step 2: Hold the button down for 10 seconds and then release. Step 3: The unit will reboot automatically.

How do I connect my D-link to my WiFi?

Step 1: Plug the DAP-1520 into a wall outlet within wireless range of your router. Step 2: open the wireless utility on your computer, select the name (SSID) of the DAP-1520 network, and enter the password (both of these are found on the included Wi-Fi Configuration Card).

How do I program my d-link?

  1. Step 1: Connect the included power adapter to a wall socket and your router.
  2. Step 2: Connect the Ethernet cable to the WAN (or internet) port of both your modem and router, connecting the two. (
  3. Step 3: Give it a moment to start up with a light indication.
  4. Step 4: Head to your computer or mobile device.

How do I turn my old modem into a Wi-Fi extender?

How to Turn an Old Router into a Wi-Fi Extender

  1. Find a Compatible Router. If you have an old router sitting around, check with the manual to make sure the device can be converted into an extender or a repeater, and get specific instructions.
  2. Update Firmware and Reset Preferences.
  3. Set a Static Address.
  4. Repeat for 5GHz.

How do I use my Dlink Wi-Fi repeater?

How to setup Repeater mode on my router? Step 1: Open your Internet browser and enter http://dlinkrouter, http://dlinkrouter.local, or http://192.168.0.1 into the address bar. Step 2: The default username is Admin. Enter your administrator password.

How do I change my Dlink DIR-505 password?

  1. Step 1: Make sure your computer or mobile device is connected to the DIR-505 by Wi-Fi. Open your web browser and enter http://dlinkrouter or http://dlinkrouter.local into the address bar.
  2. Step 2: At the login page, enter the Admin Password. If you have not changed the administrator password, leave the field blank.

Can Wi-Fi router be used as Wi-Fi extender?

Most modern routers and modem-router hybrids support Wi-Fi extension capabilities. Many older routers can also be used this way though it’s recommended they support at least the 802.11n Wi-Fi standard. You’ll need a Linksys Smart Wi-Fi router that supports Wireless Repeater mode.

How do I connect my D-Link dir-505 mobile companion to Wi-Fi?

From your iOS mobile device, click Settings. Settings 90mm 5. Click Wi-Fi and select the network (SSID) that you assigned during initial D-Link DIR-505 Mobile Companion Wi-Fi Configuration Note Web browser link: Web browser link: setup. Then, enter your Wi-Fi password.

What is the Wi-Fi D-Link dir-505?

теперь dIR-505 готов для предоставления общего доступа к сети Wi-Fi любому пк или мобильному устройству. ПРИМЕЧАНИЕ: настоятельно рекомендуется оставить наклейку с именем сети Wi-Fi и паролем Wi-Fi по умолчанию на устройстве и иметь при себе “указание по настройке Wi-Fi d-link dIR-505 mobile companion” во время путешествия с mobile companion.

How does the dir-505 work as a router?

Router In the Router mode, the DIR-505 acts as a central connection point for any computer (client) that has a 802.11n or backward- compatible 802.11g wireless network interface and is within range of the AP. Clients must use the same SSID (wireless network name) and channel as the AP in order to connect.

What is the phone number for D-Link?

обновления программного обеспечения и документация доступны на Интернет-сайте d-link. d-link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока. клиенты могут обратиться в группу технической поддержки d-link по телефону или через Интернет. Техническая поддержка D-Link: +7(495) 744-00-99