How do I register my BMW injectors?
How To Code BMW N54 Injectors With An Autel MX808
- Step 1: Replace the Injectors.
- Step 2: Plug the MX808 into the OBD2 Port.
- Step 3: Select “Service”
- Step 4: Select “Injector” from the service menu option list.
- Step 5: Select Vehicle Make.
- Step 6: Read the Vehicle VIN.
- Step 7: Verify Vehicle Information on the Next Table.
Do m57 injectors need coding?
This is very important as the new fuel injectors need to be coded to the car (Injection Quantity Compensation). ISTA-D (Or ISTA+ as it’s now known) will be needed to do this.
Do BMW injectors need coding?
The coding is needed for the engine to run properly right after injector replacement. Due to the piezo design each injector has different power and flow rates.
Do BMW n47 injectors need coding?
Registered. They will start the car ok, but they do need coding.
How do I find my injector code?
These are generally found on the injector solenoid, or in the case of some Delphi injectors, found on the parts sticker located on the injector body. Please note: We recommend coding your injectors BEFORE fitment to the vehicle.
Can you mix and match injectors N54?
One of the most common failures of the N54 happens to be the fuel injectors. What’s important to know is that the updated injectors can’t be mixed with the original style injectors. Any injector marked ten or lower in the same cylinder bank will require all the injectors in the bank to be replaced.
How much does it cost to code BMW injectors?
BMW 328i Fuel Injector Replacement Cost Estimate. Labor costs are estimated between $157 and $198 while parts are priced between $964 and $1,034. This range is based on the number and age of BMW 328i’s on the road.
How long do N54 injectors last?
The N54 fuel injectors are warrantied for 10 year or 120,000 miles. If you are under warranty, BMW will try to only replace the fuel injector that is leaking. MAKE THEM REPLACE ALL! If you have one injector leaking, it is likely more will follow soon after.