How do I fix media test failure check cable no bootable device?

Posted on by Muna Meyer

How do I fix media test failure check cable no bootable device?

How to fix PXE-E61 Media Test Failure, Check Cable Error?

  1. Check the Power Supply and Cables.
  2. Remove external USB storage devices.
  3. Change the boot order in BIOS.
  4. Disconnect the network drive or Reset BIOS.
  5. Get the help of Data Recovery Experts.

What is media test failure check cable laptop?

This indicates a problem with your computer’s PXE (pre-boot execution environment). Most often, this error occurs when your boot sequence is misconfigured in your BIOS, or your boot device (usually your hard drive) cannot be read correctly.

How do I fix Intel boot agent?

How to fix it

  1. Press F2 during boot to enter BIOS Setup.
  2. Go to Advanced > Boot > Boot Configuration.
  3. In the Boot Devices pane, disable Network Boot.
  4. Press F10 to exit BIOS Setup.

What does media failure mean?

A condition of not being able to read from or write to a storage device, such as a disk or tape, due to a defect in the recording surface.

How do I change the BIOS boot order?

Steps on How to Change System Boot Order

  1. Step 1: Enter your Computer’s BIOS set up utility.
  2. Step 2: Navigate to the boot order menu in BIOS.
  3. Step 3: Change the Boot Order.
  4. Step 4: Save your Changes.

How do I fix the media test failure on my HP laptop?

HP Notebook PCs – “PXE-E61: Media Test Failure” Error Message Appears On Black Screen

  1. Step 1: Remove the Non-System Disk from the Computer.
  2. Step 2: Test the Hard Drive.
  3. Step 3: Remove and Reseat the Hard Drive.
  4. Step 4: Reinstall the Windows Operating System on the Hard Drive.
  5. Step 5: Schedule a Repair.

How do I turn off Intel boot agent Dell?

To prevent the Intel Boot Agent (IBA) from executing:

  1. Go into the BIOS and find the order settings for the boot devices.
  2. Move the boot agent down the list after the hard drive or the device you prefer to boot from.

How do I fix media test failure on Lenovo laptop?

How do I remove media check presence?

How to Fix Checking Media Fail on Windows Startup

  1. Press F2 immediately once the Dell or Lenovo logo appears.
  2. Use the arrow key on the keyboard to move to the Boot tab.
  3. Then select the UEFI boot option.
  4. Press F5 or F6 to move it up and down the list until you arrange your boot settings in this order: