How do I connect my Canon MG3150 to WIFI?

Posted on by Muna Meyer

How do I connect my Canon MG3150 to WIFI?

Most WPS enabled access points use this protocol.

  1. Press and hold the [Maintenance] button (A) on the printer for approximately 5 seconds.
  2. Press the [Fit to Page] button (A).
  3. Make sure that the LED flashes as shown in the illustration above, then press the [WPS] button on your access point within 2 minutes.

How do I connect my Canon Pixma printer to my WIFI?

WPS Connection Method

  1. Make sure that the printer is turned on.
  2. Press and hold the [Wi-Fi ] button on the top of the printer until the orange alarm lamp flashes once and then release it.
  3. Make sure that the Wi-Fi button starts to flash blue and then go to your access point and press the [WPS] button within 2 minutes.

What model is Canon MG3150?

Compare with similar items

This item Canon PIXMA MG3150 All-in-One Colour Printer (Print, Copy, Scan, Wi-Fi and Auto Duplex) Canon MG3650S
Model Year 2011 2018
Printer Output Colour Colour
Printer Technology Inkjet Inkjet
Scanner Type Photo Sheetfed

How do I reset my Canon MG3150 printer?

Canon MG3150 – Reset Ink Levels on the Cartridges If you refill your cartridge, the printer will always show an empty cartridge message. You can override the empty cartridge message by holding down the “stop / reset” button on the printer for around five seconds.

How do I connect my printer to my virgin router?

Connecting your wireless printer

  1. Make sure your printer is on.
  2. On the touchscreen, press the right arrow key and press.
  3. Next, select Network from setup menu.
  4. Select Wireless Setup Wizard from Network menu, it will search for the wireless routers in the range.
  5. Select your Network (SSID) from the list.

How do I scan from my Canon Pixma mg3150 to my computer?

Scanning Documents

  1. Place the item on the platen. Placing Items (When Scanning from a Computer)
  2. Start IJ Scan Utility.
  3. Click Settings…, select the Settings (Document Scan) dialog, then set the paper size, resolution, etc. as required. When setting is completed, click OK.
  4. Click Document. Scanning starts.

How do I scan with Canon Pixma mg3150?

Is there a WPS button on my virgin router?

If you have an older Superhub the WPS button is that big blue glowing Virgin Media logo on the side. Press the lit-up blue button on your Super Hub for two seconds – This will prepare the Super Hub to connect to compatible WPS devices, such as your computer, Smartphone or the Push2Sync USB adapter.

How to install a driver on a Canon printer?

Canon Printer Driver for PC – fast,reliable,and robust by Canon.

  • Canon Printer Driver Free&Safe Download.
  • Canon Printer Driver latest version for the best experience.
  • It works/compatible with almost all Windows versions,including Windows XP64/Windows Vista 64/Windows 7 64/Windows 8 64/Windows 10 64.
  • Free of Cost!
  • User-friendly Interface.

    • How do I download a Canon printer driver?

    Go to Canon Support.

  • Enter your Canon model in the box. When your model appears below the box,click it.
  • Select Drivers&Downloads to the right of the image of your model.
  • Select the Drivers,Software or Firmware tab depending on what you want to download. Software is used in the example below.
  • Choose the Select button to the right of the software or driver file you wish to download. The Select button then becomes a Close button.
  • Select Download to save the file to your computer.

    • How to find Canon printer drivers?

    First of all,visit the official Canon Product Support website.

  • You need to provide the printer model number in the Search box or find your product from the Products Category Section.
  • You will need to select the drivers by choosing the correct Windows OS version of your computer.

    • How do I update my Canon printer driver?

    Turn on the printer.

  • Make sure the printer is connected to the Internet.
  • Press MENU,select Setup,and press OK.
  • Select Device settings and press OK.
  • Select Firmware update and press OK.
  • Select Install update and press OK .
  • Select Yes and press OK to confirm that you want to update the firmware.
  • Press OK to start the firmware update.