Can you put a dimmer switch on downlights?
If you are replacing an old light fitting with an LED light; for example, replacing a halogen downlight with an LED downlight, then you will need to make sure that the LED driver is dimmable. You will need to check that your new light fitting is compatible with standard dimmer switches.
Do both 3 way switches need to be dimmers?
You will need a three-way dimmer and a three-way switch. This lets you dim from one location and turn the lights on and off from another. If only one switch controls the light, purchase a single-pole dimmer. If two switches control a single light or a group of lights, you will need a three-way dimmer.
Are there 3 way dimmers?
When using a 3-way dimmer switch, you should only have one dimmer on the circuit. In this setup, the light level is controlled from a single location, whichever light switch you replace with the dimmer switch. The other light switches turn the lights off and on to the level set by the dimmer.
What are the two basic types of dimmers?
The two basic types of dimmers are electronic and autotransformer.
How do I know if my dimmer switch is compatible?
The best way to see if your current dimmer is LED compatible is to check the minimum and maximum load range of the switch itself.
What happens if you put a dimmer on a non-dimmable LED?
If you install a non-dimming LED bulb in a circuit with a dimming switch, it will likely operate normally if the dimmer is at its 100% or fully on. Dimming the bulb, will likely cause erratic behavior such as flickering or buzzing and ultimately may cause damage to the bulb.
Do you need an electrician to install a dimmer switch?
Electricity is a mystery to many people, but some electrical projects — like wiring a switch — are so simple that anyone can do them. With a few easy steps and the right knowledge, there’s no need to hire an electrician.