Can I replace my BT Openreach modem?
If you have FTTC (Fibre to the Cabinet) you can either replace just the router as long as it has a WAN port or if you want to do away with the Openreach modem you will need a VDSLModem/Router.
What is a BT Openreach modem?
If you are a fibre customer, it’s likely you’ll have an Openreach modem (or ONT) installed. This white box connects to a fibre-optic cable that runs to your house and enables you to access our FTTP fibre network for broadband and voice.
Do I need a VDSL modem?
A VoIP service means you can make calls over the internet, usually this involves a handset connected to your modem router and works pretty much the same as a standard landline, but over the internet. In these cases, regardless of the connection type, you’ll need to use a VDSL modem router with a VoIP port.
What does VDSL2 mean on a modem?
Very high-speed digital subscriber line
Very high-speed digital subscriber line (VDSL) and very high-speed digital subscriber line 2 (VDSL2) are digital subscriber line (DSL) technologies providing data transmission faster than the earlier standards of asymmetric digital subscriber line (ADSL) G.
Is BT Fibre a VDSL?
Yes, FTTC is VDSL, ADSL modem/routers won’t work..
Does VDSL2 support VDSL?
VDSL2 units are backwards compatible with VDSL Units. When a VDSL2 unit is connected to a compatible VDSL unit, VDSL2 bandwidth will revert to VDSL’s maximum supported 12Mhz frequency range.
Do I need a router for FTTP?
FTTP connections will only need a router as the NBN connection box serves as a modem. You’ll still need to pick up a router which will connect to the NBN connection box which should be installed within your premises.
Do I need a modem if I have FTTP?
FTTP/C, HFC Service Types In this case, you will simply need an eWAN (Ethernet Wide-Area-Network) WiFi Router (there is no need for a modem component). You can supply and connect your own hardware as long as it isn’t locked to your current or previous internet service provider, and that it is nbn™ compliant.
How do I setup my BT Openreach modem?
Connect your Hub and Openreach modem using the Infinity cable (the black cable with red ends.) Insert one end into the LAN 1 socket on your Openreach modem. Insert the other end in to the BT Infinity socket. Then, connect the black power cable to your Hub and your power socket.
What is Los Openreach?
PON and LOS (left-hand lights) PON solid green. Fibre optic link to BT exchange is working and recognises your Openreach fibre modem. Check physical connection at both ends of the cable between the Openreach fibre modem and Hub.