What does Error 37 mean on a Fisher and Paykel washing machine?

Posted on by Muna Meyer

What does Error 37 mean on a Fisher and Paykel washing machine?

Err 37. Pump Filter is Blocked. Clean the pump filter. Follow the instructions in ‘Caring for your washer’ in your user guide. Ensure there are no foreign objects in the pump cavity, or obstructing the impeller at the rear of the cavity.

How do I reset my digital Fisher and Paykel washing machine?

You can reset your washer to the settings it left the factory with:

  1. Enter Option Adjustment mode (refer to ‘Option Adjustment’).
  2. Select the ‘Delicate’ cycle.
  3. The display will show . Touch and hold for 3 seconds to reset your washer to its factory settings.

How do I reset my Fisher Paykel washing machine?

Factory Reset

  1. Turn the dial to select ‘Spin’.
  2. Touch and hold the ‘Delay Start’ ‘More’ , the ‘Delay Start’ ‘Less’ and ‘Options’ buttons together for 3 seconds will appear on the screen and the machine will beep.
  3. Your washer will now be reset to the default settings.

Why does my washing machine keep saying off balance?

The most likely culprit is the suspension rods. These rods help to limit the amount of side to side and front to back movement that happens when a washer enters the spin cycle. As these rods age, they no longer work as intended and need to be replaced.

How do I drain my Fisher and Paykel washing machine?

How to Drain a Top-Loading Washing Machine

  1. STEP 1: Turn off the power. Switch the power button on the machine off, if your model has one.
  2. STEP 2: Locate the drain hose and water supply hoses.
  3. STEP 3: Drain the washing machine of water.
  4. STEP 4: Remove a drain hose clog.
  5. STEP 5: Remove a drain pump clog.

How do I reset my Fisher and Paykel?

Reset Procedures for the Fisher & Paykel Dishwasher

  1. Press the power button to turn off power to the Fisher & Paykel dishwasher.
  2. Wait a few minutes and then press the power button to restore power.
  3. Turn off and unplug the dishwasher if the issue remains.
  4. Wait five minutes and restore power to the unit.

Can you factory reset a washing machine?

To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.