How do I enable DHCP server?

Posted on by Muna Meyer

How do I enable DHCP server?

To enable DHCP or change other TCP/IP settings

  1. Select Start, then type settings. Select Settings > Network & internet.
  2. Do one of the following:
  3. Next to IP assignment, select Edit.
  4. Under Edit network IP settings or Edit IP settings, select Automatic (DHCP) or Manual.
  5. When you’re done, select Save.

How do I install DHCP?

  1. Click Start, point to Control Panel, point to Administrative Tools, and then click Computer Management.
  2. Expand Services and Applications, and then click Services.
  3. Locate and then double-click DHCP Server.
  4. Verify that Startup is set to Automatic and that Service Status is set to Started.

When configuring a DHCP server what settings need to be established?

Configuring the DHCP Server for Windows

  1. Scope name and description:
  2. IP address range (for example, 192.168.
  3. Subnet mask (for example, 255.255.
  4. Add exclusions (do not exclude any IP addresses)
  5. Lease duration (accept the default of 8 days)
  6. Router (default gateway) of your subnet (for example, 192.168.

Where can I find DHCP server?

Open a command prompt. Use ipconfig /all to display all IP configuration information. Observe whether you have any network adapters that are DHCP Enabled. If so, identify your DHCP Server, when it shows Lease Obtained, and when it shows Lease Expires.

How much RAM do I need for DHCP server?

System Requirements

Operating System: Microsoft Windows XP / Vista / 7 / Server 2003 / Server 2008
Processor: Pentium or equivalent or higher
RAM: 32MB minimum
Disk Space: 5MB minimum

What is the use of DHCP server?

A DHCP Server is a network server that automatically provides and assigns IP addresses, default gateways and other network parameters to client devices. It relies on the standard protocol known as Dynamic Host Configuration Protocol or DHCP to respond to broadcast queries by clients.

What is DHCP in computer?

Dynamic Host Configuration Protocol (DHCP) is a client/server protocol that automatically provides an Internet Protocol (IP) host with its IP address and other related configuration information such as the subnet mask and default gateway.

How do I find my DHCP server on Windows 10?

How to Check DHCP Status on Windows 10

  1. Go to Control Panel.
  2. View network status and tasks under Network and Internet.
  3. Select Ethernet or Wifi (highlighted in blue), which ever you are connected to.
  4. Click on Details in the window that pops up.
  5. Look to see if DHCP Enabled says Yes.
  6. Then close out of the screens.