How do you change the mode on Vaporesso swag?

Posted on by Muna Meyer

How do you change the mode on Vaporesso swag?

Start the Device

  1. Power on/off: Press the power button 5 times in 2s.
  2. Lock/unlock the buttons: Press the power button 3 times continuously to lock or unlock the “+” Button, “-” Button and Mode Button.
  3. Mode Button: Press the Mode Button 3 times continuously to start modes setting.

How do I change my Vaporesso settings?

General Settings:

  1. Press the fire button for 5 times in 2s: Power on and off.
  2. Continuously pressing fire button 3 times to lock and unlock the up, down and mode button.
  3. Continuously pressing mode button 3 times to unlock the mode button.

How do I unlock my swag vape?

Keep pressing mode button and “+”button simultaneously for two seconds when the device is powered on, then the up and down buttons will be locked and the screen will display “SYSTEM LOCKED”. In the same way, pressing the up and mode buttons can be unlocked and the screen will display “SYSTEM UNLOCKED”.

What is VW mode on a vape?

Back in the beginning of vaping, variable wattage (VW) was the standard vaping mode. It’s a fairly simple principle. A lower wattage will give a cooler, less dense vapour and higher wattage will give a warmer more voluminous cloud.

What is SP mode Vaporesso?

SP (Super Player) Mode In SP mode, it has broader resistance range from 0.03Ω-5Ω which is adaptive to mainstream RDA tanks.

What is super player mode Vaporesso?

Super Player mode (available with the Swag II) is another Vaporesso speciality, which essentially allows you to use coils with a wider range of resistances than the device usually supports, down to 0.03Ω (and up to 5Ω) for the Omni Board 4.0 (and up to the more recent V 4.2).

How full should you fill a vape tank?

If there’s no fill line on your e-cig, then use the general rule that you shouldn’t fill past the bottom of your wick. The bottom of your wick should be located after it leaves the center post. Fill the tank up to a few millimeters below that and you should be good to go.

How do you unlock system Revenger vape?

-To unlock your Revenger device, just quickly press the power switch from the right side three times continuously in power-on state. -To reset the clock, please unlock the touch buttons first.