What do I seal my chiminea with?
The manufacturer recommended finishes are Future acrylic floor finish or a wood sealer, such as Thompson’s Water Seal. The sealer keeps moisture from seeping into the clay. Reseal the chiminea at least once a month during periods of use.
How do you protect a clay chiminea?
Use Sealers. The outside of a clay chiminea must be protected from moisture, and the best way to do this is by sealing it. Sealants protect the clay so that it becomes waterproof. Sealants last approximately three to six months, depending on how much you use your outdoor fireplace.
How do you treat a chiminea?
To cure the surface, put the grate inside the chiminea and light a small fire using little bits of kindling wood. Leave it to burn for about an hour then light a bigger, full fire straight away, before things cool down, using larger chunks of wood. Let it burn for an hour then let the chiminea cool down.
What is Chimseal?
Chimseal is the perfect product for protecting your chimenea, fire bowl, terracotta pot or any masonry product. This clear sealant is easy to apply and offers full protection against water and frost. Chimseal penetrates deep into the surface to rebuff alkalis and salts but still allows the surface to breath.
How do you coat a chiminea?
Tip
- Clean the surface your chiminea.
- Apply the sealer to the outside of the chiminea according to the manufacturer’s directions.
- Rub in the sealer thoroughly on the entire outside surface of the chiminea.
- Seal the inside of your chiminea.
- Make a fire inside the firebox using wood chips and let the fire burn out.
How do I stop my chiminea from rusting?
To delay the effects of corrosion, after use, when your chimenea is cool, simply rub your chimenea with an oily rag and cover with an appropriate rain and dust cover. It is also possible to restore the finish of your chimenea by treating it with a high temperature cover.
Do you have to seal the inside of a chiminea?
They are used for barbecues and are a beautiful addition to a backyard or patio. Once you have the chiminea installed, you will need to seal it. Sealing is a simple process and will ensure that the chiminea will not crack from the heat and keep it from getting water damaged.
How do you keep a clay chiminea from cracking?
Curing a clay chiminea hardens the clay, helping prevent cracks forming when it is being exposed to high temperatures. Put a few inches of sand in the bottom of your chiminea and build up a small fire slowly using balls of paper. Allow this fire to got out naturally and the chiminea to cool down.
Do you have to put sand in the bottom of a chiminea?
The fire in a clay chiminea needs to be built on a bed of sand so the fire doesn’t actually come into contact with the clay. Check your instructions carefully to make sure you set the fire properly. Not doing so may cause cracks in a clay chiminea.
How do you stop a chiminea from cracking?
Can I paint my clay chiminea?
You can paint a clay chiminea with a sealer to seal it before its first use or with paint to make it look nice and to protect it. You can also paint a cast iron chiminea to freshen it up after it has been used for some time and to protect it.
How do you fix a chiminea fire?
Apply the automotive repair putty or high temperature epoxy adhesive to the cracked or broken part of the chiminea. Apply enough putty or adhesive that it mounds up slightly on the surface of the clay. Use a clamp to clamp any broken pieces onto a firm section of the clay before applying the putty or epoxy adhesive.