How do you fix empty view in Solidworks?

Posted on by Muna Meyer

How do you fix empty view in Solidworks?

Resolving the empty view Issue

  1. Close the drawing (no need to save)
  2. Select File > Open > select the drawing, but do not open yet > References > double-click the model > browse to the model’s new location.
  3. The new folder path appears in green in the dialog box, to confirm the change press OK.

Why did my model disappear solidworks?

This problem usually occurs when a solid body that contain the model has a hidden display setting. Only a Ghost of the Model Is Present in Graphic Area.

How do I use detail view in Solidworks?

To create a detail view:

  1. Click Detail View. (Drawing toolbar), or click Insert > Drawing View > Detail.
  2. The Detail View PropertyManager appears and the Circle tool. is active.
  3. Sketch a circle.
  4. When the view is where you want it to be, click to place the view.

What is relative view in Solidworks?

The relative view feature can be found when working on a drawing and lets you insert an orthographic view of an assembly, part, or individual bodies. This is a useful feature to help improve the clarity of drawings created in SOLIDWORKS. …

What is model view in Solidworks?

Model View creates a single view based on a predefined view orientation. The Model View PropertyManager appears when you create a new drawing, or when you insert a model view into a drawing document.

What is an empty sketch in Solidworks?

Use empty views to sketch geometry that may not be shown by the part or assembly but that is relevant to the drawing. Click Empty View (Drawing toolbar), or click Insert > Drawing View > Empty. …

Why can’t I see my Solidworks model?

First, verify that the model is not just zoomed out by running zoom to fit. If the model does not appear now either, you can test an old support trick to trigger a calculation of the display information in the model by running normal to against one of your ground planes, followed by ctrl + Q.

How do you show solid bodies in Solidworks?

In the graphics area, select the multibody part. Right-click the multibody part and select Show Hidden Bodies. All bodies that were hidden are now shown, and all bodies that were visible are now hidden.

How do I change the projection view in Solidworks?

Click Projected View on the Drawing toolbar, or click Insert, Drawing View, Projected. The Projected View PropertyManager appears. In the graphics area, select a view from which to project. To select the direction of projection, move the pointer to the appropriate side of the selected view.

How do I open model view in Solidworks?

To insert a model view into a drawing:

  1. Click Model View. (Drawing toolbar) or Insert > Drawing View > Model.
  2. Set options in the Model View PropertyManager.
  3. Click Next .
  4. Set additional options in the Model View PropertyManager.
  5. Click .