How do I pair a Bluetooth mobile Socket scanner?

Posted on by Muna Meyer

How do I pair a Bluetooth mobile Socket scanner?

  1. Go to Bluetooth settings and select either “Socket CHS” or “D700” to pair.
  2. Open the Socket Scan 10 application again.
  3. Check mark box #1 and select Socket Scan as the input and method.
  4. Check mark box #2 and turn on Bluetooth.
  5. Check mark box #3 and select Socket Scan as a keyboard.

How do I setup a mobile socket scanner?

Instructions

  1. Hold the scan button and the small power button on the scanner simultaneously until it powers off.
  2. Press the small power button again to power on the scanner.
  3. Scan the barcode below:
  4. Press the small power button once again to power on the scanner.
  5. Scan the barcode below:

How do I make my mobile socket discoverable?

  1. Android: Connect Android Device in Basic Mode (HID) Power on the Scanner.
  2. | Menu. | Settings | Wireless & Networks | Bluetooth.
  3. settings. Make sure the device has Bluetooth “On”.
  4. Apple: Connect Apple iOS Device or Mac OS Device in Basic Mode (HID) In this mode the scanner interacts with the device like a keyboard.

How do I reset my Socket Mobile scanner?

On your scanner, hold down the large scan button and then press the small power button until you hear 3 beeps. Go to iPad > Settings > Bluetooth and make sure Bluetooth is turned ON. On the Bluetooth settings screen, now tap the blue circle on the line that says Socket CHS. Tap Forget this Device.

How do I connect my socket phone scanner to my tablet?

Next, you will need to connect your tablet with the Socket Mobile and to do this, click on Settings (Gear Icon) on your tablet. Once you are in the Settings screen, select the Bluetooth option, and sure that it is toggled ON. When ON, you will be able to have your tablet find the Socket Mobile Scanner device.

How do I connect my socket scanner to my Macbook?

Confirm the MAC OS device is Discoverable. 3. Tap Socket CHS[xxxxxx] in the list of devices found. After a few sec- onds the “Not Paired” status will change to “Connected” and the CHS Blue LED will blink every 3 seconds indicating it is Connected.

How do I pair a Socket Mobile s700?

In the Bluetooth panel, enable the Bluetooth switch. Under OTHER DEVICES, tap your barcode scanner. Once the pairing process is complete, your barcode scanner displayed as Connected under MY DEVICES. Its blue Bluetooth Light also turns solid.

Why is my Socket Mobile not scanning?

On your scanner, hold down the large scan button and then press the small power button until you hear 3 beeps. Go to iPad > Settings > Bluetooth and make sure Bluetooth is turned ON. On the Bluetooth settings screen, now tap the blue circle on the line that says Socket CHS.

How do you pair a socket?

On your iOS device, go to Settings > Bluetooth to turn on Bluetooth. You should see a device called “Socket CHS.” Tap Socket CHS on the screen to connect. The device should say “Connected” after a few seconds. To verify the device is connected, you can also open the ShipHero application on your iOS device.

How do you connect a mobile socket to a window?

Instructions

  1. Turn the scanner on by pressing and holding the small power button until the LED turns blue and it beeps twice (it will beep low and then high).
  2. To enable SPP mode on your Windows device, scan the barcode below.
  3. Search for Bluetooth settings on device.