How do I check my network on HP-UX?

Posted on by Muna Meyer

How do I check my network on HP-UX?

On the HP-UX system, ping the broadcast address of the LAN interface. (To determine the broadcast address for lanX, look at the output of ifconfig lanX.) If there is no network connectivity, then there will be no responses from other systems on the subnet.

How do you assign IP address in HP-UX?

Re: How to Change IP address on HP-UX 9000

  1. SAM -> Network Configuration.
  2. Edit /etc/rc.config.d/netconf file and change IP.
  3. ifconfig – temperory change only.
  4. set_parms.

How do I find MAC address on HP-UX?

HP-UX (HP UNIX)

  1. As the root user (or user with appropriate permissions)
  2. Type “/usr/sbin/lanscan”
  3. From the displayed information, find lan0 (this is the default first Ethernet adapter)
  4. Locate the number below Address. This is your MAC address.

How do I change the hostname on my HP-UX?

Re: How to change the hostname on HP-UX you can edit the file /etc/rc. config. d/netconf, and on next reboot the hostname will be changed.

How do I find my IP address on Unix?

To find out the IP address of Linux/UNIX/*BSD/macOS and Unixish system, you need to use the command called ifconfig on Unix and the ip command or hostname command on Linux. These commands used to configure the kernel-resident network interfaces and display IP address such as 10.8. 0.1 or 192.168.

How do I find my hostname in HP Unix?

You can also edit the file /etc/rc. config. d/netconf . This file contains the hostname, IP address, default route and more.

How do I find my IP address on a MAC using command prompt?

Option 2

  1. Hold down the “Windows Key” and press “R“.
  2. Type “CMD“, then press “Enter“.
  3. You can use one of the following commands: GETMAC /s computername – Get MAC Address remotely by Computer Name. GETMAC /s 192.168.1.1 – Get MAC Address by IP Address. GETMAC /s localhost – Get local MAC Address.

How can I find the IP address from a MAC address?

Can you find an IP address from a MAC address? Yes. Open a Command Prompt window and enter the command arp -a. The output shows all of the IP addresses that are active on your network.