What does ACOP L117 stand for?
Approved Code of Practice and guidance
Rider-operated lift trucks: Operator training and safe use, Approved Code of Practice and guidance (L117)
What are the regulations regarding ensuring that your forklift is safe to use?
Ensuring that all forklifts can be safely controlled with braking, that drivers have adequate vision, and that lighting is adequate. Making sure that all equipment is suitable for the purpose for which it is being used. Keeping equipment in good repair, and keeping a maintenance log.
What does the Approved Code of Practice for training operators and instructors of power lift industrial forklifts do?
Approved code of practice for training operators and instructors of powered industrial lift trucks (forklifts) outlines a standard of training that should be provided by forklift owners, managers and trainers of forklift owners, managers and trainers of forklift operators.
What is the approved code of practice?
Approved Codes of Practice (ACOPs) are guidance with specific legal standing. They deal with a wide range of hazardous materials and working practices. Employers who are prosecuted for a breach of health and safety law, who have not followed an ACOP, are likely to be found at fault by the courts.
What is HSG136?
Date of publication: September 2014 Series code: HSG136 (Third edition) Download a free copy ( PDF ) This guide provides advice for employers on what they need to do to comply with the law and reduce risk.
What should not be done when operating a forklift?
Avoid standing or walking under a load, lifting mechanism, or forklift attachment, as loads can fall off on anyone positioned below it. Keep hands and feet clear away from the forklift mast, as a moving mast can cause serious injury.
Can I drive a forklift without a licence NZ?
Driving a forklift on a road To drive a forklift on a road, you must have a driver licence for the appropriate class and an F (forklift) driver licence endorsement. Your forklift must also be registered and have a warrant of fitness – and it may need an alternative fuel certificate.
What do codes of practice provide?
Codes of practice provide detailed safety and standards information on specific work tasks. A code of practice provides detailed information on specific work tasks to help you achieve the standards required under the work health and safety (WHS) laws.
What is an Approved code of practice HSE?
Approved codes of practice are detailed guidance documents approved by the HSE and published to accompany a set of health and safety regulations. They are documents that help you to comply with your legal requirements.
What is the forklift training code of practice?
Forklifts – The Approved Code of Practice for Training Operators and Instructors of Powered Industrial Lift trucks (forklifts) This code of practice outlines a standard of training that should be provided by forklift owners, managers and trainers of forklift operators.
What are the rules and regulations for operating a forklift?
34 Training Operators and Instructors of Powered Industrial Lift Trucks (Forklifts) OPERATING SAFETy RULES AND PRACTICES 2. Give the right of way to pedestrians and emergency vehicles such as ambulances and fire trucks. 3. Do not pass another forklift travelling in the same direction at intersections, blind spots, or at dangerous locations. 4.
Is the forklift training certificate valid for forklifts?
This certificate is valid for forklifts up to a nominal lifting capacity of kg. Retraining is to be undertaken every three (3) years. This certificate is the legal property of the person to whom it is issued. 60 Training Operators and Instructors of Powered Industrial Lift Trucks (Forklifts) APPENDICES
When to use operator protection on a forklift?
Any active operator-protection device or system, when provided, shall be used. In the event of tip-over, operator protection is intended to reduce risk of entrapment of the head and torso between the forklift and the ground, but may not protect the operator against all possible injury. 20.