Why is my Whirlpool Cabrio leaking from the bottom?
If the drain pump is cracked or damaged, or if the bearings are worn out, the drain pump may leak water. The drain pump is not repairable—if the pump is leaking water, replace it. The tub seal might be torn, causing water to leak from the seal.
Why is water leaking from bottom of washer?
A washer leaking from the bottom can cause significant damage to your home if it is not fixed quickly. In most cases, the leak will be caused by a loose or punctured drain hose, a fault with the drain pump, or a worn-out tub-to-pump hose. Consult your washer’s manual if you are unsure which panel to remove.
Why is water coming out of the front of my washing machine?
One of the most common causes of washing machine leaks is the door seal / flange. The door is used a lot so often the seal gets ripped or torn, letting water leak down either inside or externally down the front of the machine. On front-loading washers, check for moisture around the outside of the door seal.
Why won’t my Whirlpool Cabrio washer drain?
Look for any kinks in the Cabrio washer’s discharge hose that could stop the water from draining. Straightening the hose ensures proper draining. Check the installation of the discharge hose if the washer still fails to drain.
Why is my top loader washing machine leaking?
Leaks at the front of a top-load washer are usually caused by a clogged or tilted overflow tube. Clogs can happen from excess suds caused by using too much detergent or combining laundry products inappropriately. Oversudsing can easily happen in homes that have a water softening system.
Why does my top load washer leak?
Why does my washer leak on the spin cycle?
A washing machine leaking during spin cycle means you have a problem in either one of the large drain hoses, one of the seals inside the pump, or one of the outer tub seals. Too much detergent can also cause washer leaks on spin cycle.
What are causes of a leaking washer?
Defective Door Seal. Older washing machines are more likely to develop a problem with the door.
Why is my Whirlpool Cabrio washer not draining?
Why is my Cabrio washer not draining? Check the washer’s discharge hose if the water fails to drain from the washtub. Look for any kinks in the Cabrio washer’s discharge hose that could stop the water from draining. Straightening the hose ensures proper draining. Test the drain pump to ensure it has not failed if the washer still will not drain.
How to troubleshoot a whirlpool Cabrio washer?
A defective door lock that fails either electrically or mechanically may stop the washer in the mid-cycle.
How to get water out of a whirlpool Cabrio washer?
Look for the “Second Rinse” or “Extra Rinse” button on the washer control panel.