Where is the VIN number on a Harley Davidson?
Look for your Harley Davidson VIN number near the neck of your frame. The VIN is typically stamped into the frame and also, usually appears on a permanent sticker that is on one of the frame down tubes.
What year did Harley start putting VIN on frame?
1981 -2000: Beginning in 1981, Harley started using a 17 digit VIN number on the frame and an abbreviated VIN on the engine case. As always, the legal title must match the VIN number on the frame.
Where is the VIN number on a motorcycle frame?
Generally speaking, with the vast majority of motorcycles, the VIN is found to the right of the headstock tube. Usually on the part of the frame that the forks go through, underneath the throttle. The VIN will be stamped deep into the frame.
Where is the VIN number on a Harley Davidson Ultra Classic?
The full 17-digit VIN is stamped on the right side of the frame near the steering head. In some destinations, a printed VIN label is also attached to the right front downtube.
How do you read a Harley Davidson VIN number?
Harley-Davidson VIN Decoder
- First character: Country code.
- Second character: Manufacturer code.
- Third character: Vehicle type (motorcycles are typically “1” or “A”)
- Characters four through nine: Identifies engine type, engine size, and model with the ninth character as an accuracy check.
- Tenth character: Year code.
What does my Harley VIN number mean?
The VIN was between 8 and 10 digits with the first 2 digits being the production year, the next 2 – 4 letters being the model designation and the last 4 digits being the production number. Example: Year. Model. Production Number.
How do you tell what year a Harley is by the VIN number?
The VIN numbers of this era where 9 digit codes where the first two digits corresponded to the model code (see list below), the next 5 digits were the production numbers (always starting above 10,000) and the last 2 digits were the year code (see list below).
Is the frame number the same as the VIN number on a motorcycle?
For information about a specific make or model of a motorcycle, the owner must have the frame (chassis) and engine numbers. For example, a motorcycle with a year model stated as 10/1982 on the VIN (Vehicle Identification Number) decal will actually be a 1983 model.
Where do I find my bike frame number?
Most bicycles have a frame number stamped into the metal under the bottom bracket. If it’s a carbon frame, the number will be etched into the surface or displayed on a sticker. Occasionally, the frame number will be on the inside of the chain stay or on the down tube or top tube.
Does the VIN follow the frame or engine on a Harley?
This goes for restamping frames or adding the original VIN to a replacement frame. If you replace the frame, you need to have a new VIN assigned to your Harley. Always remember that on models built after 1970, the Harley VIN always follows the frame… not the engine!
Where is the VIN number on a 1970 Harley Davidson motorcycle?
From 1970 to 1980 the VIN number could be found on both the frame and the engine and would match exactly with the exception of a few months in 1979 which was due to an idea by the factory to make them different. The idea was quickly killed after law enforcement notified Harley-Davidson that it made the bikes look stolen.
Is it illegal to change the VIN number on a Harley?
You might be able to fool a few cops or even someone at the DMV, but don’t count on it. In addition, it should go without saying that any alteration to the VIN is illegal. This goes for restamping frames or adding the original VIN to a replacement frame. If you replace the frame, you need to have a new VIN assigned to your Harley.
Can you put a Harley engine in a new frame?
If you have a Harley engine with matching title taken from a crashed or salvaged motorcycle, and put that engine into a new frame, the title is invalid. Anyone trying to sell you a post-1970 Harley where the title VIN only matches the engine, but does not match the number on the frame, PASS!