What is the lever on the bottom of my wood stove?
The handle looks like coiled wire. This is a flue vent to control how much air passes over the fire and up the stove.
How do you control the temperature on a wood stove?
So here are five different techniques you can use to reduce heat output in mild weather while still producing a clean, efficient burn.
- Fuel species.
- Amount of wood loaded.
- Load configuration.
- Load orientation.
- Reduce the combustion air supply.
- A final comment on burning wood in spring and fall.
How do you reset a wood stove?
Place the kindling in the firebox, scatter crumpled newspapers throughout, then use extra-long fireplace matches to light the newspapers. “Once the kindling burns down, put smaller pieces of wood on the fire, then start adding a few larger pieces,” he explains.
What should my wood stove be set to?
Wood stoves need a heat-resistant pad underneath to protect the house from excessive heat and flames. The pad should extend at least 18 inches past all sides of the stove, but check your model to learn whether it requires a larger pad.
Which way do you turn a wood stove damper?
How to Use a Wood Stove Damper
- Orient yourself with the damper handle on the outside of your flue pipe or the exterior of your stove.
- Open the damper all the way, if you are lighting a fire.
- Close the damper about two-thirds of the way as the fire begins to catch and coals start to form.
Why is my stove not drawing?
The main reasons why your wood stove does not draw can include: The stove or flue is too cold. The flue or chimney is dirty. The room or house is too airtight.
What do the levers on a wood stove do?
Oxygen is one of the things that a fire needs to burn, and many wood stoves have one or more levers you can use to control valves that allow air into the firebox. When you’re starting a fire, you want all the valves fully open.
What is the little lever on the side of my fireplace for?
in your home are turned off when burning your fire. Also, some wood burning fireplaces have a lever to open or close the outside air vent to the fireplace. If your fireplace has this lever (usually located on the left inside panel) make sure the outside air vent is in the open (or up) position.
Is it OK to leave the door open on a wood stove?
Wood burning stoves are not designed to be used with the door open. You can use a wood burning stove with the door open but doing so will lose the control of the air flow into the stove, making it operate less efficiently and sending more heat up the chimney rather than out into the room.
Where should I put my stove thermometer?
DESCRIPTION
- Place the Thermometer on the top, front, or side of a flat or curved surface.
- The optimum position is on the flue collar, or if not practical, as close to the collar as possible for a stable reliable place for monitoring the stove and flue gas temperature.