What is the Cable Select setting on a hard drive?
Cable select, also referred to by the acronym CS, is a disk drive jumper setting which automatically sets the priority of a disk drive by its position on its data cable. When cable select is enabled, the drive configures itself as a primary or secondary depending on its position in the drive chain.
Why is my HDD not being detected?
The BIOS will not detect a hard disk if the data cable is damaged or the connection is incorrect. Be sure to check your SATA cables are tightly connected to the SATA port connection. The easiest way to test a cable is to replace it with another cable.
Is Pata the same as IDE?
IDE and PATA are two terms that people typically get confused over since they are used in referring to pretty much the same hard drives. Although it might seem like there should be some difference between the hardware identified by the two, when it comes to hard drives, there is actually no difference.
How do I set master drive to IDE?
Connect the drive using the Master connector on the primary IDE cable. Set the first CD/DVD drive jumper to Master (alternatively, Cable Select can be used if you set the second CD/DVD drive selection to Cable Select). Connect the drive using the Master connector on the secondary IDE cable.
What is jumper block?
In a computer, a jumper is a pair of prongs that are electrical contact points set into the computer motherboard or an adapter card . When you set a jumper, you place a plug on the prongs that completes a contact. A group of jumpers is sometimes called a jumper block .
How do I enable my hard drive?
To enable a hard drive using Device Manager, use these steps:
- Open Start.
- Search for Device Manager and click the top result to open the app.
- Expand the Disk drives branch.
- Right-click the hard drive in question and select the Properties option.
- Click the Driver tab.
- Click the Enable Device button.
- Click the OK button.