How do I change my default gateway Synology?
To change the default gateway:
- Go to Control Panel > Network.
- Under Network Interface, click Service Order.
- Rearrange your gateways by selecting the gateway and clicking Up or Down.
- Click OK.
How do I connect my Synology NAS to my local network?
How to troubleshoot connecting to your Synology NAS
- Head to the Synology website.
- Choose your NAS model.
- Download Synology Assistant.
- Install the software.
- Run Synology Assistant.
- Allow the suite to search your network.
- Right-click your NAS and choose Connect.
How do I access my Synology NAS without Internet?
Sure. No need for a router or an external connection. Assign static IP’s to all the devices, connect via a hub or switch and you’re good to go. You can add a router to assign the IP addresses (or some NAS devices have DHCP server capability- eg Synology).
How do I use a default gateway?
Configuring the IPv4 Default Gateway
- Go to Control Panel > System > Network > IPv4 > Default Gateway.
- Under Use the settings from, select an interface that QES will use as the default route.
- Add a static route. Click Static Route. The Static Route window opens. Specify an IP or subnet address.
- Click Apply.
How do I change the IP address of my NAS?
Instructions
- Within the GUI, Go to Settings > NAS Servers.
- Once you are in the list of NAS Servers, Select the NAS Server you wish to modify.
- Select the network interface and click on modify, Change the IP address. Then click on Update.
- It will update the new IP and You will find changed IP address on NAS Server.
Can I connect my Synology NAS directly to my computer?
If you want to connect your NAS directly, you can do it. Set up manual IP on your PC and NAS with a one in the same IP range. Than use Synology finder app or type IP in the address bar and it’s done. Maximum speed for regular network cable is 1Gb/s which is around 115MB/s in real life.
How do you set a default gateway on a switch?
To configure the default gateway for the switch, use the ip default-gateway command. Enter the IP address of the default gateway. The default gateway is the IP address of the router interface to which the switch is connected. Use the copy running-config startup-config command to back up your configuration.
How do I Configure my Synology NAS as a wireless router?
When your Synology NAS acts as a wireless router, you can configure the following Wireless LAN settings at Control Panel > Network > Network Interface. You can set the IP address and subnet mask for your Synology NAS here.
Why configure Synology’s VPN Server?
Configuring Synology’s VPN Server allows you to securely connect to your home network to access your NAS and local resources. It also completely bypasses the need for QuickConnect or exposing your NAS to the internet (which is a security risk).
Does Synology NAS support IPv4/IPv6 dual stack?
Synology NAS devices support IPv4/IPv6 dual stack schemes. This means that both IPv4 and IPv6 can work simultaneously on your Synology NAS. The default settings for IPv6 is Auto. Select an existing network interface, click the Edit button, and go to the IPv6 tab to change settings. Go to Control Panel > Network > Network Interface.
How do I enable PPPoE on my Synology NAS?
Check the option Enable DHCP server to allow your Synology NAS to assign IP addresses to client devices that connect to the local network provided by your Synology NAS. Enable PPPoE Relay to allow devices that are connected to your Synology NAS to connect to the Internet via PPPoE connection.