How long is a Dana 44 axle?
Predator Axles Front Axle Shafts
| Part Number | Length From Center of U-Joint | Differential Model |
|---|---|---|
| 38805QG | 15.82″ | Dana 30 |
| 38809QG | 18.31″ | Dana 44 |
| 38810QG | 27.94″ | Dana 44 |
| 38815QG | 9.94″ | D44 & GM 8.5″ |
How long is a Dana 30 axle?
Dana 30 – Front. Spline Count – 27. Driver side (Left) Axle Length – 24.25″ Passenger side (Right) Axle Length – 41″
How wide is a Wagoneer Dana 44?
Long Jeep Fan My 78 narrow track waggy front dana 44 was narrowed by 3.5″ and is now right around 56-56.5 inches wide which would put the stock width at 59.5-60″ I could go home and measure it for sure if you want.
How wide are Jeep axles?
At 60 3/4 inches wide, this axle is almost the same width as a TJ (61 1/2 inches, wheel-mounting surface to wheel-mounting surface). They are commonly found with Trac-Lok limited slips and either 4.30 or 4.56 gears.
Do I have a Dana 35 or 44?
There are a few things that can help you tell if the axle is a Dana 35 or a Dana 44. The easiest way to tell these axles apart is to look at the shape of the differential cover. The Dana 35 cover is pretty much perfectly round. The Dana 44 is sort of a six-sided shape.
What Jeeps have a Dana 30 front axle?
There are different Dana 30 gear sets for the YJ, TJ and JK. These axles have a 7.56” Ring Gear Diameter. The same version D35 gear set is used in the YJ and TJ, and a newer design is used in the JL.
What jeeps have Dana 30 axles?
Every YJ came with a Dana 30 up front and a Dana 35 in the rear. TJ Wranglers will have either a Dana 30 in the front and a Dana 35 in the rear unless you have a Rubicon model.
How wide is a Jeep Wagoneer axle?
Re: Widest Width of Rear Axle and Tire Combo – Wagoneer Stock rear axle is actually 57.5″ WMS for a wagoneer. Front is just shy of 60″.
How wide are Jeep Wagoneer axles?
How wide are Jeep JK axles?
This assembled axle is the stock JK width (65.5 inches), comes with a 35-spline ARB Air Locker and 5.38:1 gears.