What material is used for lab countertops?
Epoxy Resin
Laboratory countertops are American made and available in Phenolic Resin, Epoxy Resin and Stainless Steel.
What are black laboratory countertops made of?
Phenolic resin countertops are manufactured by saturating layers of natural kraft paper with phenolic resin. The layers are then processed under extreme heat. This forms solid surface composite panels. The core of phenolic resin countertops is black, but you can custom order colors.
Why are lab counters black?
As far as why all labs look the same, with the black countertops and the wood shelving, Letitia Saunders, a lab manager in the biological sciences building, said her theory is it’s because of real wood’s durability in the face of clumsy young scientists.
What are lab sinks made of?
Epoxy resin is the most popular laboratory sink material and is highly resistant to many acids, solvents and other inert chemicals found in both commercial and educational laboratory settings. Epoxy sinks are available in all of the same colors as epoxy tops.
How do you clean a black science lab table?
How to Clean Epoxy Resin
- Mild soaps, water, vinegar, and household cleaners can be used for regular surface cleaning.
- Isopropyl alcohol or acetone can be used on tough spots and stains.
- Remove marring with a soft cloth, dampened (non-abrasive) sponge, or clean rags.
How do you clean black lab countertops?
Acetone, Mineral Spirits or Isopropyl Alcohol should be used (where allowed) to thoroughly clean surfaces. Apply and wipe away with a clean soft rag. Wipe counter top surfaces with the solution of the mild non-abrasive soap and water, wash away soap with clear clean water and wipe dry.
What are old lab benches made of?
Different types of labs require different work surface materials for laboratory workbenches. The 7 most commonly used countertop materials for scientific or industrial use are epoxy resin, phenolic resin, stainless steel, maple block (aka butcher block or wood block), solid surface, HDPE, and ESD laminate.
What are chem lab tables made of?
Solid epoxy resin, which can endure corrosive chemicals and is resistant to heat, moisture, and impact damage, is the standard lab table for most laboratory applications.
How do you polish lab countertops?
Epoxy Resin Countertops
- Mild soaps, water, vinegar, and household cleaners can be used for regular surface cleaning.
- Isopropyl alcohol or acetone can be used on tough spots and stains.
- Remove marring with a soft cloth, dampened (non-abrasive) sponge, or clean rags.
How do you clean a lab sink?
Cleaning the Sink
- Using tongs or forceps, remove debris from the drain.
- Place any sharps in a sharps container.
- Remove all items from the sink.
- Using dishsoap and warm water, scrub all parts of the sink with a nylon scrub brush.
- Rinse thoroughly.
- Harsh chemicals should never be required if a sink is maintained properly.
How do you clean a science lab sink?
INTRODUCTION
- Move the dirty glassware containers to a ventilated sink;
- Clean the glassware with soap and water followed by a water rinse;
- Rinse the glassware with acetone (see Figure 1), which is an excellent drying agent due to its quick evaporation rate;
- Place the clean glassware into a drying basket within the sink;
How do you refinish a science lab table?
Both the primer and the epoxy finish are required to properly refinish your lab tabletop. Tops should be thoroughly cleaned of oil, wax or residue with lacquer thinner. Existing finish should be thoroughly sanded with 80-grit sandpaper to feather-edge any nicks, scratches, etc., and to remove any buildup of residue.