How do you program a hunter XC sprinkler system?

Posted on by Muna Meyer

How do you program a hunter XC sprinkler system?

How to Program Your Hunter X-Core Sprinkler System

  1. Step 1: Set The Current Time. First, you will want to ensure that the current time is correct.
  2. Step 2: Set the Start Times. Next, turn the dial to “Start Times”.
  3. Step 3: Set the Run Time.
  4. Step 4: Set the Watering Days.
  5. Step 5: Test Coverage.
  6. Step 6: Finished!

How do you reset Hunter XC?

Resetting the XC controller

  1. Press and hold down the , and buttons.
  2. Press and release the RESET button in the lower wiring compartment.
  3. Release the , and buttons. The display should now show 12:00a. m.
  4. All the memory has been cleared and the controller may now be reprogrammed.

How do you use a hunter sprinkler controller?

56 second clip suggested15:07Pro-C Basic Programming – YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply choose the station you might start with ensure that it has the desired run time and turn theMoreSimply choose the station you might start with ensure that it has the desired run time and turn the dial to run. The station will start running and you’ll notice a sprinkler flashing on the display.

How do I turn on my Hunter XC sprinkler system?

X-Core – One Touch Manual Start and Advance

  1. Hold down the arrow (>) button for 2 seconds.
  2. This feature automatically defaults to program A.
  3. The station number will be flashing.
  4. Press the arrow (>) button scroll to the station you wish to begin with.

How do I set the time on my hunter sprinkler system?

60 second clip suggested6:56Hunter X-Core Programming Overview and Setting Up Program AYouTube

How do I reset my hunter timer?

27 second clip suggested3:05Reset a Hunter Controller – Quick Tip – YouTubeYouTube

How do I reset my sprinkler timer?

How to Reset a Sprinkler System

  1. Turn the control dial to the “off” position.
  2. Press the “next” button to access the clear-memory feature.
  3. Press and hold the “off” button until the display stops blinking.
  4. Turn the control dial to the “run” position.
  5. Press and hold down the “minus” arrow and “prog” buttons simultaneously.

How does Hunter Pro C rain sensor work?

When the weather sensor has deactivated automatic watering, “OFF” will appear on the display. The Pro-C provides simplified testing of a rain sensor when the sensor is wired into the sensor circuit. During the Manual cycle, pressing the test button on the “Clik-type” sensor (eg. Mini-Clik®) will interrupt watering.

How do you test a hunter sprinkler system?

42 second clip suggested1:00Hunter sprinkler controller testing trick – YouTubeYouTube

Does the hunter X2 have a battery?

The X2 controller has a non-replaceable 3V CR2032 lithium battery installed directly on the circuit board. The controller will immediately enter hibernation mode when AC power is unavailable. The battery backup keeps the current date and time during power outage conditions.