Is The Miller Bobcat 250 a good welder?
Miller’s Bobcat 250 is a rugged welder generator that’s great for Stick and Flux-Cored welding and designed for maintenance/repair operations, construction, farm, ranch and generator use.
How much does a Miller Bobcat 250 weigh?
Specifications
| Rated Output: | MIG/FCAW 250 A at 28 V, 100% duty cycle MIG/FCAW 275 A at 25 V, 60% duty cycle AC/DC Stick/TIG 250 A at 25 V, 100% duty cycle |
|---|---|
| Generator Power: | Accu-Rated™ 10,500 Watts Peak 9,500 Watts Continuous |
| Weight: | 560 lb (254 kg) |
| Engine: | Kohler 25 HP at 3600 RPM (LP) |
How many hours will a Miller Bobcat 225 last?
| Additional Specs: | |
|---|---|
| Generator Power 104DegF | Accu-Rated Power 11,000 Watts Peak, 9,500 Watts Continuous |
| Run Time | Welding with an 1/8 inch Stick electrode, 20% Duty Cycle, expect about 20 hours of operation. Under a continuous 4,000 watt generator load, expect approximately 14 hours of run time. |
How much does a Miller Bobcat 260 weigh?
General Specifications
| Title | Bobcat™ 260 LP (Kohler) Engine-Driven Welder |
|---|---|
| Net Width | 20 in |
| Net Height | 28 in |
| Net Length | 40.5 in |
| Net Weight | 501 lbs |
How long will a Miller Bobcat 250 run on a tank of gas?
14 hours
For example, the Miller Bobcat™ 250 welder/ generator holds 12 gallons of gas and can run for 14 hours under a continuous load of 4,000 watts.
What kind of oil does a Miller Bobcat 250 take?
Kohler recommends a 10W-30 weight motor oil, which provides adequate protection in most environments.
How many amps is a Miller 250 welder?
Other Miller Bobcat 250 Options:
| Rated Output | CC/AC Stick/TIG: 225 Amps at 25 Volts CC/DC Stick/TIG: 250 Amps at 25 Volts CV/DC MIG/FCAW: 200 Amps at 20 Volts |
|---|---|
| Welding Amperage Range | CC/AC Stick/TIG: 40 – 250 Amps CC/DC Stick/TIG: 40- 250 Amps CV/DC MIG/FCAW: 17-28 Volts |
| Net Weight | 32 lbs (12 oz) |
What is the lifespan of a welder?
It can be varied from 1 to more than 40 years. Li et al. reported some cases with 36 years of working history as a welder (14). However in some other studies, there are cases with 40 years of experience in welding (15).
How long do gas welders last?
I have seen those engines go 2200 -3000 hours with proper care and very regular servicing. Most of the time they have a major failure from overheating or no oil. When they start to have major blowby and develop leaks they are on the way out.
What oil does a Miller gas welder take?
Use a multi-viscosity, SAE SJ grade or better oil. Kohler recommends a 10W-30 weight motor oil, which provides adequate protection in most environments. If you work in extremely cold environments (0 degrees Fahrenheit or colder), use a 5W-30 oil, as it circulates more easily during cold starts.
How much oil does a Miller Bobcat 260 take?
Fuel Capacity: 12 gal. Oil Capacity: 1.5 qt.