What kind of motor oil does a 2002 Ford Explorer take?
The two base engines the 4.0L V6 (non-flex fuel compatible) and the 4.0L V6 (flex fuel compatible) require 5 quarts of 5W30 synthetic oil while the 4.6L V8 optional engine takes 6 quarts of 5W20 synthetic oil.
What type of oil does a Ford Explorer use?
The recommended oil type for the Ford Explorer is a SAE full synthetic at a viscosity of 5W-30 and 0W-20 for vehicles with under 75,000 miles.
Can I use 5W-30 instead of 5W20 in my Ford Explorer?
The internal engine components of your car work with 5W-20 motor oil, so you risk damaging it if you use 5W-30 instead of 5W-20. There is no difference in winter rating between 5W-20 and 5W-30 motor oils. A heavier oil is likely to flow slower because of its higher viscosity.
Can I put 10w30 In my Ford Explorer?
You are fine using 10w30 also. Good luck.
How do you reset the oil light on a 2002 Ford Explorer?
How to Reset the 2002 Ford Explorer XLT After an Oil Change
- Crank the Explorer’s engine or turn the key to the “ACC” ignition position. Push the “Setup” button to the right of the steering wheel.
- Push “Reset.” The screen will show “Oil Life – Hold Reset New”
- Press and hold “Reset” for two seconds.
How much oil does a 2002 Ford Explorer take?
Capacity: 6 quarts. . (with filter)When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. After refill, check oil level.
Does Ford Explorer need synthetic oil?
An oil change is one of the most central and vital services for your car. Ford recommends getting your 2021 Ford Explorer oil & filter replenished every 3,000-5,000 miles for conventional oil. Synthetic oil frequently should be replenished every 7,500 – 10,000 miles.
Can I use 10w30 instead of 5w20?
Originally Answered: Can I put 10w30 instead of 5w20? You can, but you will get worse mileage, and in most cases shorten the life of your engine, as it will take longer to pump up pressure for your bearings and lifters, and won’t spray your lower cylinders for an extra second or so on each cold start.
Which oil is better 5w20 or 5W-30?
When it comes to their higher operating temperature performance, 5W30 motor oil performs slightly better than 5W-20 and is a thicker oil than its counterpart. Thus, it will protect your engine parts better under moderate oil pressure and high temperature settings.
Can I use 10w30 instead of 5W30 Reddit?
This is not true. The viscosity does not change the physical size of oil. Viscosity is resistance to flow, nothing more.
What oil does a 2001 Ford Explorer take?
The 2001 Ford Explorer with the 4.0L V6 engine, it takes 5 quarts of 5W30 synthetic oil for capacity. The optional 5.0L V8 engine takes 5 quarts of 5W20 synthetic oil.
What kind of oil does a Ford Explorer take?
Answer Wiki. The specified weight as required by Ford is 5w30 oil but you can play with the oil viscosity depending on your climate and how you drive your explorer.
How much is the oil for a 1997 Ford Explorer?
How to choose motor oil. 1997, Pro High Performanceâ„¢ SAE 5W-20 Synthetic Blend Ford Explorer 4.0L The average cost of a Ford Explorer oil change is between $172 and $202, with labor costs estimated to be between $39 and $50, and parts between $133 and $152.
How much is an oil change for a Ford Explorer?
The average cost of a Ford Explorer oil change is between $172 and $202, with labor costs estimated to be between $39 and $50, and parts between $133 and $152. Hey, I’m David. I’ve worked in a cars store for 6 years.
What kind of oil should I use in my Toyota Corolla?
You can use full dino oil, full synthetic or one of the mixes. This vehicle has 4.0 ltr gasoline engine, manufacturer recommendation for this engine SAE 5W-30 grade oil Depend upon climate and use we can go up to 5W-40 grade oil. I think 5W -40 better oil for this engine. Can solar power save money in 2022?