How do you remove an old cassette from a bike?
To remove the cassette, hold it from spinning using a chain whip. Insert the lockring tool (use the FR-5 series), and turn the tool counter-clockwise. The locking ring will unthread from the freehub and the cassette will lift upward.
What can I use instead of chain whip?
Put the qr through the tool to hold it to the lockring to make it a bit easier with a limited number of hands. I’ve used pieces of old chains on wood, but now just use a work glove to hold the cassette.
Can I replace a freewheel with a cassette?
Cassette hubs cannot accept freewheels; nor can freewheel hubs accept a cassette. The freehub body of a cassette hub is shaped specifically for a cassette. Thus, it’s impossible to mount a freewheel on a cassette hub. If you want to use a freewheel, you will have to replace the rear hub with a threaded one.
What is the best tool to remove a bicycle cassette?
Bike Cassette Removal Tool with Chain whip and Auxiliary Wrench Bicycle Sprocket Removal Tools Sprocket Remover … . . . . . . . . . . . . . . . . . . . TOULIFLY Bicycle Flywheel Remover Sprocket Remover Tool Set, Bicycle Cassette Removal Tool with Chain Whip + Auxiliary Wrench + Rotor Lockring Removal with Pin + Sprocket Remover. .
How do you remove the lockring on a cassette cassette?
Cassette Lockring Removal. Hold cogs in clockwise direction with sprocket chain whip tool. Turn remover counter-clockwise, using a large adjustable wrench, the hex end of another Park Tool sprocket chain whip tool, or the Park Tool FRW-1 freewheel wrench. It will require force to remove the lockring.
How do you remove the cassette on a SRAM XD?
SRAM XD freehub cassette system To remove the cassette, hold it from spinning using a chain whip. Insert the lockring tool (use the FR-5 series), and turn the tool counter-clockwise. The locking ring will unthread from the freehub and the cassette will lift upward.
How do I remove the cassette from the freehub?
To remove the cassette, hold it from spinning using a chain whip. Insert the lockring tool (use the FR-5 series), and turn the tool counter-clockwise. The locking ring will unthread from the freehub and the cassette will lift upward.