How do you reset the oil life on a 2013 Ford Fusion?

Posted on by Muna Meyer

How do you reset the oil life on a 2013 Ford Fusion?

2013-2015

  1. Turn the ignition to the ON position without starting the engine.
  2. Simultaneously press the accelerator and brake pedals and hold them in the fully pressed position.
  3. After 3 seconds, the message center displays “Service: Oil Reset In Prog”

How do you reset the oil life on a 2017 Ford Fusion?

In order to reset the oil life indicator on the 2017 Ford Fusion, turn the ignition to the on position without starting the engine, and use the directional pad on the steering wheel to navigate to the settings, then vehicle, and then oil life reset.

How do you reset the oil life on a 2014 Ford Fusion?

How To Reset Oil Life/Oil Change Light On Ford Fusion

  1. Turn the key to the on position. If your vehicle has an ignition button, push the START/STOP button once without step on the brake pedal.
  2. Go to the main menu.
  3. Enter the SETTINGS menu.
  4. Scroll to the VEHICLE.
  5. Select OIL LIFE RESET.
  6. Set the oil life.

How do you reset the oil life on a 2012 Ford Fusion?

To reset the oil light on Your 2012 Ford Fusion, turn the ignition key to the ON position. Don’t start the engine! Press the SETUP button repeatedly until You see OIL LIFE =% HOLD RESET = NEW . Press and hold the RESET button until OIL LIFE SET TO 100% is displayed.

How do you reset the oil life on a Ford Fusion 2019?

Ford Fusion Oil Life Reset

  1. Turn the ignition to the “ON” position, but do not start the engine.
  2. Use the directional pad on the steering wheel and scroll through the settings area under the heading menu.
  3. Go to Settings >
  4. Vehicle >
  5. Oil Life Reset.
  6. The Remaining Oil will Display.

How do you reset the oil life on a 2010 Ford Fusion?

You can reset the oil change light in the 2010 ford fusion, turn the ignition to the “on” position, hit “setup” twice, it will say “oil life remaining xx%” on the info screen, hold the reset button.

How do you reset the oil life on a 2018 Ford Fusion?

If You want to reset the oil light on Your 2018 Ford Fusion, go ahead and turn Your ignition to ON. Go ahead and go to the Settings menu using the arrow keys on Your steering wheel. Head over to the Vehicle menu. When You’re there, look for Oil Life Reset and select it.

How do you reset the oil life on a 2020 Ford Fusion?

How do you reset the oil life on a Ford Fusion 2020?

How do you reset the oil light on a 2009 Ford Fusion?

Turn the key to the on position, and hold down the brake and gas pedals for 20 seconds to reset the oil light.

How bad is the Ford Fusion?

The most common problems associated with this Ford model are engine stalls, fire, loss of acceleration, transmission shifting, noisy creaks, leaks, tricky lug nuts, steering failures, etc. Although there are others, transmission issues are a major concern.

How to replace Ford Fusion?

Battery Replacement: 2013-2019 Ford Fusion. 1. Getting Started – Prepare for the repair. 2. Open the Hood – How to pop the hood and prop it open. 3. Access Battery – Learn where the battery is located. 4. Remove Bracket – Take off the bracket that secures the battery.

How do you change engine on a Ford Fusion?

Getting Started – Prepare for the repair

  • Open the Hood – How to pop the hood and prop it open
  • Find Oil Drain – Locate the oil drain plug underneath the vehicle
  • Drain Oil – Set up the workspace,drain oil and replace plug
  • Find Oil Filter – Locate the oil filter
  • Remove Filter – Position drain pan and remove the oil filter

    • When to change timing belt on Ford Fusion?

    Disconnect the battery ground cable.

  • Once the engine is cold,set the crankshaft to top dead center with the number one piston on the compression stroke.
  • Remove all accessories interfering with the removal of the timing belt covers.
  • Remove timing belt covers.
  • If replacing the water pump,do so at this time,and of course drain the cooling system first.